[U-Boot] [PATCH v2 2/2] usb: exynos5: arndale: Add network support

[Marek Vasut <marex@denx.de>]

On Thursday, January 02, 2014 at 10:41:59 AM, Inderpal Singh wrote:
> Arndale board has AX88760, which is USB 2.0 Hub & USB 2.0 Ethernet Combo
> controller, connected to HSIC Phy of USB host controller via USB3503 hub.
> 
> This patch implements a board specific board_usb_init function in ehci
> driver to perform reset sequence for USB3503 hub and enables the relevant
> config options for network to work.
> 
> Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
> ---
>  board/samsung/arndale/arndale.c |   13 +++++++++++++
>  drivers/usb/host/ehci-exynos.c  |   10 ++++++++++
>  include/configs/arndale.h       |    4 ++++
>  3 files changed, 27 insertions(+)
> 
> diff --git a/board/samsung/arndale/arndale.c
> b/board/samsung/arndale/arndale.c index 052fecd..deca348 100644
> --- a/board/samsung/arndale/arndale.c
> +++ b/board/samsung/arndale/arndale.c
> @@ -7,10 +7,23 @@
>  #include <common.h>
>  #include <asm/arch/pinmux.h>
>  #include <asm/arch/dwmmc.h>
> +#include <asm/arch/gpio.h>
>  #include <asm/arch/power.h>
> 
>  DECLARE_GLOBAL_DATA_PTR;
> 
> +#ifdef CONFIG_USB_EHCI_EXYNOS
> +void exynos_board_usb_init(int value)
> +{
> +	struct exynos5_gpio_part1 *gpio = (struct exynos5_gpio_part1 *)
> +						samsung_get_base_gpio_part1();
> +
> +	/* Configure gpios for usb 3503 hub's reset and connect */
> +	s5p_gpio_direction_output(&gpio->x3, 5, value);
> +	s5p_gpio_direction_output(&gpio->d1, 7, value);
> +}
> +#endif
> +
>  int board_init(void)
>  {
>  	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
> diff --git a/drivers/usb/host/ehci-exynos.c
> b/drivers/usb/host/ehci-exynos.c index 88e6466..4be6a60 100644
> --- a/drivers/usb/host/ehci-exynos.c
> +++ b/drivers/usb/host/ehci-exynos.c
> @@ -175,6 +175,12 @@ static void reset_usb_phy(struct exynos_usb_phy *usb)
>  	set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
>  }
> 
> +inline void __exynos_board_usb_init(int value)
> +{
> +}
> +void exynos_board_usb_init(int)
> +	 __attribute__((weak, alias("__exynos_board_usb_init")));
> +

Sorry, this is not happening. Why can you not use the existing board_usb_init() 
and instead have to invent new stuff ?

[..]