From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 00/30] zynq: More boards support
Date: Fri, 10 Jan 2014 15:58:13 +0100 [thread overview]
Message-ID: <20140110155813.3e5bedde@lilith> (raw)
In-Reply-To: <bce0b4da-ce82-43fc-9765-6f2013c88fe9@AM1EHSMHS018.ehs.local>
Hi Jagannadha,
On Thu, 9 Jan 2014 01:48:01 +0530, Jagannadha Sutradharudu Teki
<jagannadha.sutradharudu-teki@xilinx.com> wrote:
> These changes are from u-boot-xlnx.git repo from git.xilinx.com
> and in addition of basic fdt support. This repo is well tested
> on xilinx zynq platform, hence pushing the same on upstream.
>
> Excluded qspi and nand changes from previous series.
>
> --
> Thanks,
> Jagan.
>
> Changes for v5:
> - rebase to u-boot-arm/master
> - Enabled CONFIG_DEFAULT_DEVICE_TREE in pre-board config files.
> - Updated build steps on doc/README.zynq
> Changes for v4:
> - rebase to master
> - Removed CONFIG_SYS_NO_FLASH in zynq-common.h
> Changes for v3:
> - Removed CONFIG_ZYNQ_QSPI
> - Removed CONFIG_NAND_ZYNQ
> - Removed CONFIG_SYS_PROMPT_HUSH_PS2
> - Documented bootmode detection code
> - Added comments
>
> Jagannadha Sutradharudu Teki (30):
> zynq: Enable CONFIG_FIT_VERBOSE
> zynq: Enable Boot FreeBSD/vxWorks
> zynq: Cleanup on miscellaneous configs
> zynq: Cleanup on memory configs
> zynq: Minor config cleanup
> zynq: Enable cache options
> zynq: Add UART0, UART1 configs support
> zynq: Add GEM0, GEM1 configs support
> zynq-common: Rename zynq with zynq-common
> doc: zynq: Add information on zynq u-boot
> zynq: Add zynq zc70x board support
> zynq: Add zynq zed board support
> zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs
> zynq-common: Define exact TEXT_BASE
> zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
> zynq: Add zynq microzed board support
> zynq: Add zynq_zc770 xm010 board support
> zynq: Add zynq_zc770 xm013 board support
> zynq: Add zynq_zc770 xm012 board support
> zynq: Add support to find bootmode
> zynq-common: Define default environment
> zynq-common: Change Env. Sector size to 128Kb
> zynq-common: Define flash env. partition
> zynq-common: Define CONFIG_ENV_OVERWRITE
> dts: zynq: Add basic fdt support
> gpio: zynq: Add dummy gpio routines
> zynq-common: Enable verified boot(RSA)
> dts: zynq: Add more zynq dts files
> zynq: Enable CONFIG_DEFAULT_DEVICE_TREE
> doc: Update the zynq u-boot status
>
> arch/arm/cpu/armv7/zynq/slcr.c | 6 +
> arch/arm/dts/zynq-7000.dtsi | 13 ++
> arch/arm/include/asm/arch-zynq/gpio.h | 25 +++
> arch/arm/include/asm/arch-zynq/sys_proto.h | 1 +
> board/xilinx/dts/zynq-microzed.dts | 14 ++
> board/xilinx/dts/zynq-zc702.dts | 14 ++
> board/xilinx/dts/zynq-zc706.dts | 14 ++
> board/xilinx/dts/zynq-zc770-xm010.dts | 14 ++
> board/xilinx/dts/zynq-zc770-xm012.dts | 14 ++
> board/xilinx/dts/zynq-zc770-xm013.dts | 14 ++
> board/xilinx/dts/zynq-zed.dts | 14 ++
> board/xilinx/zynq/board.c | 25 +++
> boards.cfg | 8 +-
> doc/README.zynq | 94 ++++++++++++
> include/configs/zynq-common.h | 238 +++++++++++++++++++++++++++++
> include/configs/zynq.h | 139 -----------------
> include/configs/zynq_microzed.h | 26 ++++
> include/configs/zynq_zc70x.h | 29 ++++
> include/configs/zynq_zc770.h | 42 +++++
> include/configs/zynq_zed.h | 27 ++++
> 20 files changed, 630 insertions(+), 141 deletions(-)
> create mode 100644 arch/arm/dts/zynq-7000.dtsi
> create mode 100644 arch/arm/include/asm/arch-zynq/gpio.h
> create mode 100644 board/xilinx/dts/zynq-microzed.dts
> create mode 100644 board/xilinx/dts/zynq-zc702.dts
> create mode 100644 board/xilinx/dts/zynq-zc706.dts
> create mode 100644 board/xilinx/dts/zynq-zc770-xm010.dts
> create mode 100644 board/xilinx/dts/zynq-zc770-xm012.dts
> create mode 100644 board/xilinx/dts/zynq-zc770-xm013.dts
> create mode 100644 board/xilinx/dts/zynq-zed.dts
> create mode 100644 doc/README.zynq
> create mode 100644 include/configs/zynq-common.h
> delete mode 100644 include/configs/zynq.h
> create mode 100644 include/configs/zynq_microzed.h
> create mode 100644 include/configs/zynq_zc70x.h
> create mode 100644 include/configs/zynq_zc770.h
> create mode 100644 include/configs/zynq_zed.h
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
prev parent reply other threads:[~2014-01-10 14:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-08 20:18 [U-Boot] [PATCH v5 00/30] zynq: More boards support Jagannadha Sutradharudu Teki
2014-01-09 14:32 ` Jagan Teki
2014-01-10 14:58 ` Albert ARIBAUD [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140110155813.3e5bedde@lilith \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).