From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Mon, 13 Jan 2014 14:42:18 -0500 Subject: [U-Boot] Pull request: u-boot-spi/master In-Reply-To: References: Message-ID: <20140113194218.GI5181@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Jan 14, 2014 at 12:05:32AM +0530, Jagannadha Sutradharudu Teki wrote: > Hi Tom, > > PR have quad and dual_flash change set also includes few fixes. > Tested these changes on spansion, stmicro and sst flash devices. > > -- > Thanks, > Jagan. > > The following changes since commit 7f673c99c2d8d1aa21996c5b914f06d784b080ca: > > Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-01-10 10:56:00 -0500) > > are available in the git repository at: > > > git://git.denx.de/u-boot-spi.git master > > for you to fetch changes up to 35a55fb57fffb615e6b20980fb317e162076adb4: > > sf: params: Removed flag SECT_4K for Micron N25Q128 (2014-01-12 21:40:23 +0530) > > ---------------------------------------------------------------- > Axel Lin (1): > spi: sh_spi: Use sh_spi_clear_bit() instead of open-coded > > Jagannadha Sutradharudu Teki (17): > sf: Add extended read commands support > sf: Add quad read/write commands support > sf: ops: Add configuration register writing support > sf: Set quad enable bit support > sf: probe: Enable RD_FULL and WR_QPP > sf: Separate the flash params table > sf: Add QUAD_IO_FAST read support > sf: Discover read dummy_byte > sf: Add macronix set QEB support > sf: probe: Enable macronix quad read/write cmds support > sf: Divide flash register ops from QEB code > sf: Code cleanups > sf: ops: Unify read_ops bank configuration > sf: Add dual memories support - DUAL_STACKED > sf: Add dual memories support - DUAL_PARALLEL > sf: Add CONFIG_SF_DUAL_FLASH > doc: SPI: Update status.txt > > Kuo-Jung Su (1): > spi: Add Faraday SPI controller support > > Simon Glass (1): > sandbox: spi: Adjust 'sf test' to work on sandbox > > Siva Durga Prasad Paladugu (1): > sf: params: Removed flag SECT_4K for Micron N25Q128 > > README | 6 + > common/cmd_sf.c | 14 +- > doc/SPI/README.dual-flash | 92 +++++++ > doc/SPI/README.ftssp010_spi_test | 41 ++++ > doc/SPI/status.txt | 11 +- > drivers/mtd/spi/Makefile | 4 +- > drivers/mtd/spi/sf.c | 4 + > drivers/mtd/spi/sf_internal.h | 34 ++- > drivers/mtd/spi/sf_ops.c | 157 +++++++++--- > drivers/mtd/spi/sf_params.c | 130 ++++++++++ > drivers/mtd/spi/sf_probe.c | 274 +++++++++++---------- > drivers/spi/Makefile | 1 + > drivers/spi/ftssp010_spi.c | 508 +++++++++++++++++++++++++++++++++++++++ > drivers/spi/sh_spi.c | 10 +- > include/spi.h | 26 ++ > include/spi_flash.h | 57 +++++ > 16 files changed, 1171 insertions(+), 198 deletions(-) > create mode 100644 doc/SPI/README.dual-flash > create mode 100644 doc/SPI/README.ftssp010_spi_test > create mode 100644 drivers/mtd/spi/sf_params.c > create mode 100644 drivers/spi/ftssp010_spi.c Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: