From mboxrd@z Thu Jan 1 00:00:00 1970 From: Albert ARIBAUD Date: Tue, 14 Jan 2014 08:20:33 +0100 Subject: [U-Boot] [PATCH REPOST4 1/2] ARM: rpi_b: power on SDHCI and USB HW modules In-Reply-To: <1389667812-8066-1-git-send-email-swarren@wwwdotorg.org> References: <1389667812-8066-1-git-send-email-swarren@wwwdotorg.org> Message-ID: <20140114082033.53e6ae37@lilith> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Stephen, On Mon, 13 Jan 2014 19:50:11 -0700, Stephen Warren wrote: > Send RPC commands to the VideoCore to turn on the SDHCI and USB modules. > For SDHCI this isn't needed in practice, since the firmware already > turned on the power in order to load U-Boot. However, it's best to be > explicit. For USB, this is necessary, since the module isn't powered > otherwise. This will allow the kernel USB driver to work. > > Signed-off-by: Stephen Warren > --- > Could this please be applied for v2014.01? I know I did first post it > after the merge window closed (by just a few hours...) but there's always > plenty of other stuff that's accepted under similar timing. I'm not against taking this in as this affects only a single board (and provided Tom is OK too). Also, I'd really like to know whether the three reposts are actually versions (in which case I'd have liked a version history, even limited to "vN: rebase" if such is the case) or pings (in which case I'd prefer "ping?" replies, as these replies do not create patch entries in patchwork). Amicalement, -- Albert.