From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Mon, 20 Jan 2014 17:58:42 -0500 Subject: [U-Boot] [U-Boot, REPOST4, 1/2] ARM: rpi_b: power on SDHCI and USB HW modules In-Reply-To: <1389667812-8066-1-git-send-email-swarren@wwwdotorg.org> References: <1389667812-8066-1-git-send-email-swarren@wwwdotorg.org> Message-ID: <20140120225842.GD3277@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Jan 13, 2014 at 07:50:11PM -0700, Stephen Warren wrote: > Send RPC commands to the VideoCore to turn on the SDHCI and USB modules. > For SDHCI this isn't needed in practice, since the firmware already > turned on the power in order to load U-Boot. However, it's best to be > explicit. For USB, this is necessary, since the module isn't powered > otherwise. This will allow the kernel USB driver to work. > > Signed-off-by: Stephen Warren Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: