From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-mpc85xx master
Date: Tue, 4 Feb 2014 17:05:10 -0500 [thread overview]
Message-ID: <20140204220510.GI7049@bill-the-cat> (raw)
In-Reply-To: <52EFCC2A.9030908@freescale.com>
On Mon, Feb 03, 2014 at 09:04:42AM -0800, York Sun wrote:
> Tom,
>
> The following changes since commit 07e2822d158940a0e8ba45b6ab0344ffa1011a07:
>
> board: nios2: Check if flash is configured before calling
> early_flash_cmd_reset() (2014-01-29 16:44:18 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx.git master
>
> for you to fetch changes up to 1b4175d6fa12b8012c119889ad5cc1e65c3cf6ba:
>
> driver/ifc:Change accessor function to take care of endianness (2014-02-03
> 08:38:51 -0800)
>
> ----------------------------------------------------------------
> Nikhil Badola (1):
> powerpc/usb: Enable dual phy for T1040
>
> Prabhakar Kushwaha (6):
> driver/fsl_pci:Update print to display PCIe generation
> powerpc/mpc85xx:Fix README to show correct flash memory map
> powerpc/mpc85xx: Update serdes protocols for T1040
> boards/t1040qds: Adds ethernet support for T1040
> powerpc/t104xrdb: Update T1042RDB.h in config folder
> driver/ifc:Change accessor function to take care of endianness
>
> Priyanka Jain (2):
> powerpc/t104xrdb: Update T1040RDB.h in config folder
> powerpc/t104xrdb: Add basic ethernet support
>
> Rainer Boschung (2):
> kmp204x: support for QRIO1 bootcounter
> kmp204x: I2C deblocking support
>
> Valentin Longchamp (7):
> kmp204x: introduce QRIO GPIO functions
> kmp204x: implement workaround for A-006559
> kmp204x: add support for the kmcoge4 board
> kmp204x: update I2C field of RCW
> KM: add the KM_UBI_PART_BOOT_OPTS #define
> kmp204x: enable support for SPANSION SPI NOR
> kmp204x: initial support for PCIe FPGA configuration
>
> poonam aggrwal (1):
> powerpc/mpc85xx: Update LIODNs for T1040
>
> README | 6 +
> arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c | 2 +
> arch/powerpc/cpu/mpc85xx/t1040_ids.c | 36 --
> arch/powerpc/cpu/mpc85xx/t1040_serdes.c | 63 ++-
> arch/powerpc/include/asm/config_mpc85xx.h | 6 +-
> arch/powerpc/include/asm/fsl_serdes.h | 8 +-
> arch/powerpc/include/asm/immap_85xx.h | 11 +
> board/freescale/t1040qds/Makefile | 1 +
> board/freescale/t1040qds/README | 6 +-
> board/freescale/t1040qds/eth.c | 492 ++++++++++++++++++++++++
> board/freescale/t1040qds/t1040qds.c | 1 +
> board/freescale/t104xrdb/Makefile | 1 +
> board/freescale/t104xrdb/README | 6 +-
> board/freescale/t104xrdb/eth.c | 72 ++++
> board/keymile/kmp204x/Makefile | 2 +-
> board/keymile/kmp204x/kmp204x.c | 128 +++---
> board/keymile/kmp204x/kmp204x.h | 10 +
> board/keymile/kmp204x/pbi.cfg | 10 +
> board/keymile/kmp204x/pci.c | 85 ++++
> board/keymile/kmp204x/qrio.c | 146 +++++++
> board/keymile/kmp204x/rcw_kmp204x.cfg | 2 +-
> boards.cfg | 1 +
> doc/README.b4860qds | 4 +-
> drivers/mtd/nand/fsl_ifc_nand.c | 243 ++++++------
> drivers/mtd/nand/fsl_ifc_spl.c | 60 +--
> drivers/net/fm/t1040.c | 56 +++
> drivers/pci/fsl_pci_init.c | 4 +-
> include/configs/T1040QDS.h | 5 +-
> include/configs/T1040RDB.h | 24 +-
> include/configs/T1042RDB_PI.h | 20 +-
> include/configs/km/keymile-common.h | 10 +-
> include/configs/km/kmp204x-common.h | 21 +-
> include/configs/kmp204x.h | 7 +-
> include/fsl_ifc.h | 42 +-
> 34 files changed, 1230 insertions(+), 361 deletions(-)
> create mode 100644 board/freescale/t1040qds/eth.c
> create mode 100644 board/freescale/t104xrdb/eth.c
> create mode 100644 board/keymile/kmp204x/qrio.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140204/db9fd4b6/attachment.pgp>
next prev parent reply other threads:[~2014-02-04 22:05 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-03 17:04 [U-Boot] Please pull u-boot-mpc85xx master York Sun
2014-02-04 22:05 ` Tom Rini [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-01-24 16:25 York Sun
2019-01-25 15:16 ` Tom Rini
2018-10-30 19:21 York Sun
2018-10-31 14:44 ` Tom Rini
2018-09-28 15:35 York Sun
2018-09-30 2:27 ` Tom Rini
2018-07-31 17:25 York Sun
2018-08-01 15:05 ` Tom Rini
2018-07-31 17:12 York Sun
2018-07-31 17:16 ` York Sun
2017-12-08 16:59 York Sun
2017-12-09 1:35 ` Tom Rini
2017-06-13 17:02 York Sun
2017-06-15 13:01 ` Tom Rini
2017-02-01 16:19 york sun
2017-02-02 3:20 ` Tom Rini
2017-01-25 5:26 york sun
2017-01-26 3:00 ` Tom Rini
2016-12-20 17:15 york sun
2016-12-22 2:30 ` Tom Rini
2016-12-04 17:02 york sun
2016-12-04 23:00 ` Tom Rini
2016-11-29 22:18 york sun
2016-11-30 14:12 ` Tom Rini
2016-10-15 17:02 york sun
2016-10-18 0:08 ` Tom Rini
2016-07-22 0:17 york sun
2016-07-23 0:09 ` Tom Rini
2016-07-25 18:52 ` Scott Wood
2016-07-25 19:02 ` york sun
2016-06-04 16:03 York Sun
2016-06-06 11:16 ` Tom Rini
2016-05-25 3:37 York Sun
2016-05-26 15:49 ` Tom Rini
2016-04-08 22:45 York Sun
2016-04-11 15:00 ` Tom Rini
2016-02-26 18:51 york sun
2016-02-26 19:09 ` Tom Rini
2016-01-25 20:49 york sun
2016-01-26 22:44 ` Tom Rini
[not found] <568BFBF0.3040605@freescale.com>
2016-01-05 18:21 ` York Sun
[not found] <563A9399.80500@freescale.com>
2015-11-04 23:45 ` Tom Rini
2015-11-02 21:06 York Sun
2015-11-02 23:17 ` Tom Rini
2015-09-02 15:26 York Sun
2015-09-02 21:58 ` Tom Rini
2015-07-31 16:00 York Sun
2015-08-01 14:47 ` Tom Rini
2015-05-05 16:55 York Sun
2015-05-05 23:59 ` Tom Rini
2015-04-20 21:05 York Sun
2015-04-22 15:52 ` Tom Rini
2015-03-05 20:20 York Sun
2015-03-06 15:43 ` Tom Rini
2015-01-23 0:49 York Sun
2015-01-23 21:57 ` Tom Rini
2014-12-16 17:24 York Sun
2014-12-17 0:45 ` Tom Rini
2014-12-05 16:10 York Sun
2014-12-08 21:41 ` Tom Rini
2014-07-23 20:19 York Sun
2014-07-28 19:03 ` Tom Rini
2014-06-05 21:30 York Sun
2014-06-05 22:50 ` Tom Rini
2014-05-16 22:12 York Sun
2014-05-19 12:47 ` Tom Rini
2014-04-23 22:45 York Sun
2014-04-25 19:44 ` Tom Rini
2014-01-03 23:57 York Sun
2014-01-07 17:16 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140204220510.GI7049@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox