From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Thu, 6 Feb 2014 04:48:50 +0100
Subject: [U-Boot] [PATCH] usb: mv_udc: Rename to ci_udc
In-Reply-To: <52F2FD49.4000708@boundarydevices.com>
References: <1391651340-18504-1-git-send-email-marex@denx.de>
	<52F2FD49.4000708@boundarydevices.com>
Message-ID: <201402060448.50206.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Thursday, February 06, 2014 at 04:11:05 AM, Eric Nelson wrote:
> Hi Marek,
> 
> On 02/05/2014 06:49 PM, Marek Vasut wrote:
> > The mv_udc is not marvell-specific anymore. The mv_udc is used to drive
> > generic ChipIdea CI13xxx series OTG cores, so rename the driver to ci_udc
> > instead.
> 
> Sounds good.
> 
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Eric Nelson <eric.nelson@boundarydevices.com>
> > Cc: Stefano Babic <sbabic@denx.de>
> > ---
> > 
> >   board/boundary/nitrogen6x/nitrogen6x.c    |   2 +-
> >   drivers/serial/usbtty.h                   |   4 +-
> >   drivers/usb/gadget/Makefile               |   2 +-
> >   drivers/usb/gadget/{mv_udc.c => ci_udc.c} | 178
> >   +++++++++++++++--------------- drivers/usb/gadget/{mv_udc.h =>
> >   ci_udc.h} |  12 +-
> >   drivers/usb/gadget/gadget_chips.h         |   8 +-
> >   include/configs/nitrogen6x.h              |   2 +-
> >   include/configs/sansa_fuze_plus.h         |   2 +-
> >   include/configs/xfi3.h                    |   2 +-
> >   include/usb/{mv_udc.h => ci_udc.h}        |   6 +-
> >   10 files changed, 109 insertions(+), 109 deletions(-)
> >   rename drivers/usb/gadget/{mv_udc.c => ci_udc.c} (79%)
> >   rename drivers/usb/gadget/{mv_udc.h => ci_udc.h} (94%)
> >   rename include/usb/{mv_udc.h => ci_udc.h} (73%)
> > 
> > ...
> > diff --git a/drivers/usb/gadget/mv_udc.c b/drivers/usb/gadget/ci_udc.c
> > similarity index 79%
> > rename from drivers/usb/gadget/mv_udc.c
> > rename to drivers/usb/gadget/ci_udc.c
> > index da41738..6c5ef4c 100644
> > --- a/drivers/usb/gadget/mv_udc.c
> > +++ b/drivers/usb/gadget/ci_udc.c
> > 
>  > ...
> 
> I think you missed the mvudc_probe() routine though:
> > @@ -673,23 +673,23 @@ static int mvudc_probe(void)
> 
> Aside from that...
> 
> Reviewed-by: Eric Nelson <eric.nelson@boundarydevices.com>

Thanks, fixed in V2.

Best regards,
Marek Vasut