From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [U-Boot: RESEND][PATCH 0/7] Add support for Keystone2 SoC and K2HK EVM
Date: Mon, 10 Feb 2014 19:01:33 +0100 [thread overview]
Message-ID: <20140210190133.4d95f66a@lilith> (raw)
In-Reply-To: <52F90AED.700@ti.com>
Hi Murali,
On Mon, 10 Feb 2014 12:22:53 -0500, Murali Karicheri
<m-karicheri2@ti.com> wrote:
> On 2/10/2014 3:32 AM, Albert ARIBAUD wrote:
> > Hi Murali,
> >
> > On Fri, 7 Feb 2014 18:23:07 -0500, Murali Karicheri
> > <m-karicheri2@ti.com> wrote:
> >
> >> - Resending since I missed some in the CC
> >>
> >> This patch series add support for keystone2 SoC and K2HK EVM.
> >>
> >> Following patches were reviewed before in this list and v1 of the
> >> same is send with review comments incorporated:-
> >> - tools: mkimage: add support for gpimage format
> >> - arm: add support for arch timer
> >> - NAND: DaVinci: allow forced disable of subpage writes
> >>
> >> The patch below is added as a seperate patch based on comments:-
> >> - tools: sort the entries in Makefile
> >>
> >> Murali Karicheri (5):
> >> tools: sort the entries in Makefile
> >> tools: mkimage: add support for gpimage format
> > Is this image format required? Can't one of the existing image formats
> > be used?
> Alebert,
>
> Thanks for your response.
>
> We are actually re-using part of the OMAP image format by factoring out
> the common code
> and re-using. So this is not a new format. Please review the code.
Thanks. This describes what you do and how you do it, but it does not
tell me why you are doing it and why you can't do otherwise. Let me
rephrase my question since you're mentioning branching off the OMAP
image format: why branch off? Why not simply use the existing OMAP image
format? Or another one?
> Murali
Amicalement,
--
Albert.
next prev parent reply other threads:[~2014-02-10 18:01 UTC|newest]
Thread overview: 129+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <yes>
2009-07-28 16:34 ` [U-Boot] [RFC 0/3] uboot-doc User's Manual Generation Tool John Schmoller
2009-07-28 17:49 ` Wolfgang Denk
2009-07-28 20:40 ` jschmoller
2009-07-28 21:27 ` Wolfgang Denk
2009-07-28 22:16 ` Robin Getz
2009-07-30 9:59 ` Detlev Zundel
2009-07-30 18:45 ` Wolfgang Denk
2009-07-30 19:50 ` Robin Getz
2009-07-30 19:55 ` Wolfgang Denk
2009-07-31 1:49 ` Robin Getz
2009-08-13 7:32 ` Mike Frysinger
2009-07-29 14:48 ` jschmoller
2009-07-28 16:34 ` [U-Boot] [RFC 1/3] uboot-doc: Initial support of user documentation generator John Schmoller
2009-07-28 16:34 ` [U-Boot] [RFC 2/3] uboot-doc: Add example support for uboot-doc John Schmoller
2009-07-28 17:52 ` Wolfgang Denk
2009-07-28 20:42 ` jschmoller
2009-07-28 21:37 ` Wolfgang Denk
2009-07-28 16:34 ` [U-Boot] [RFC 3/3] xpedite5370: Add uboot-doc support John Schmoller
2011-05-02 21:01 ` [U-Boot] [PATCH v4 0/5] Add support for LaCie NAS Network Space v2 Simon Guinot
2011-05-02 21:29 ` Wolfgang Denk
2011-05-02 22:46 ` Simon Guinot
2011-05-02 21:01 ` [U-Boot] [PATCH v4 1/5] sf: disable write protection for Macronix flash Simon Guinot
2011-05-02 21:07 ` Mike Frysinger
2011-05-02 21:01 ` [U-Boot] [PATCH v4 2/5] Kirkwood: allow to override CONFIG_SYS_TCLK Simon Guinot
2011-05-02 21:01 ` [U-Boot] [PATCH v4 3/5] mv-common.h: fix DRAM banks configuration Simon Guinot
2011-05-02 21:01 ` [U-Boot] [PATCH v4 4/5] netconsole: remove `serverip' check Simon Guinot
2011-05-02 21:01 ` [U-Boot] [PATCH v4 5/5] Add support for Network Space v2 Simon Guinot
2011-05-02 22:42 ` [U-Boot] [PATCH v5 0/5] Add support for LaCie NAS " Simon Guinot
2011-05-03 9:59 ` Prafulla Wadaskar
2011-05-02 22:42 ` [U-Boot] [PATCH v5 1/5] sf: disable write protection for Macronix flash Simon Guinot
2011-07-08 20:32 ` [U-Boot] [PATCH v6] sf: macronix: disable write protection when initializing Mike Frysinger
2011-08-02 20:02 ` Wolfgang Denk
2011-05-02 22:42 ` [U-Boot] [PATCH v5 2/5] Kirkwood: allow to override CONFIG_SYS_TCLK Simon Guinot
2011-05-03 12:09 ` Prafulla Wadaskar
2011-05-02 22:42 ` [U-Boot] [PATCH v5 3/5] mv-common.h: fix DRAM banks configuration Simon Guinot
2011-05-03 12:09 ` Prafulla Wadaskar
2011-05-02 22:42 ` [U-Boot] [PATCH v5 4/5] netconsole: remove `serverip' check Simon Guinot
2011-05-02 22:42 ` [U-Boot] [PATCH v5 5/5] Add support for Network Space v2 Simon Guinot
2011-05-03 13:19 ` Simon Guinot
2011-05-12 17:24 ` Wolfgang Denk
2012-02-16 2:59 ` [U-Boot] [PATCH 0/5] Support for qualcomm msm7630 board mohamed.haneef at lntinfotech.com
2012-02-23 8:59 ` [U-Boot] reminder for " Mohamed Haneef
2012-10-26 21:15 ` [U-Boot] " Albert ARIBAUD
2012-02-16 2:59 ` [U-Boot] [PATCH 1/5] msm7x30: Add support for low speed uart on msm7x30 mohamed.haneef at lntinfotech.com
2012-02-28 23:44 ` Albert ARIBAUD
2012-03-05 14:34 ` [U-Boot] [PATCH v2 1/5] msm7x30: Add Support " Mohamed Haneef
2012-03-22 8:50 ` [U-Boot] reminder for [PATCH 0/5] Support for qualcomm msm7630 board mohamed.haneef at lntinfotech.com
2012-04-23 9:24 ` [U-Boot] (no subject) mohamed.haneef at lntinfotech.com
2012-04-23 9:31 ` [U-Boot] msm7630 mainline request mohamed.haneef at lntinfotech.com
2012-05-03 0:09 ` Marek Vasut
2012-02-16 2:59 ` [U-Boot] [PATCH 2/5] msm7x30: Add support for interprocessor communication mohamed.haneef at lntinfotech.com
2012-02-28 23:46 ` Albert ARIBAUD
2012-03-05 14:33 ` Mohamed Haneef
2012-02-16 2:59 ` [U-Boot] [PATCH 3/5] msm7x30: Add support for Qualcomm msm7630 soc mohamed.haneef at lntinfotech.com
2012-02-29 0:00 ` Albert ARIBAUD
2012-03-05 14:39 ` [U-Boot] [PATCH v2 3/5] msm7x30: Add support for msm7x30 SoC Mohamed Haneef
2012-02-16 2:59 ` [U-Boot] [PATCH 4/5] Add support for mmc read and writes mohamed.haneef at lntinfotech.com
2012-02-29 0:03 ` Albert ARIBAUD
2012-03-05 14:40 ` [U-Boot] [PATCH v2 4/5] Add Support for qc_mmc MMC Controller Mohamed Haneef
2012-05-03 22:05 ` Andy Fleming
2012-05-10 11:37 ` Mohamed Haneef
2012-02-16 2:59 ` [U-Boot] [PATCH 5/5] msm7x30: Add support for msm7630_surf board mohamed.haneef at lntinfotech.com
2012-10-03 8:19 ` Albert ARIBAUD
2014-02-07 23:23 ` [U-Boot] [U-Boot: RESEND][PATCH 0/7] Add support for Keystone2 SoC and K2HK EVM Murali Karicheri
2014-02-07 23:23 ` [U-Boot] [U-Boot:RESEND][[PATCH 1/7] fdt: call ft_board_setup_ex() at the end of image_setup_libfdt() Murali Karicheri
2014-02-10 21:25 ` Tom Rini
2014-02-11 1:05 ` Vitaly Andrianov
2014-02-07 23:23 ` [U-Boot] [U-Boot:RESEND][[PATCH 2/7] tools: sort the entries in Makefile Murali Karicheri
2014-02-07 23:23 ` [U-Boot] [U-Boot:RESEND][[PATCH 3/7 v1] tools: mkimage: add support for gpimage format Murali Karicheri
2014-02-07 23:23 ` [U-Boot] [U-Boot:RESEND][[PATCH 4/7 v1] arm: add support for arch timer Murali Karicheri
2014-02-07 23:23 ` [U-Boot] [U-Boot:RESEND][[PATCH 5/7 v1] NAND: DaVinci: allow forced disable of subpage writes Murali Karicheri
2014-02-07 23:23 ` [U-Boot] [U-Boot:RESEND][[PATCH 6/7] k2hk: add support for k2hk SOC and EVM Murali Karicheri
2014-02-10 21:25 ` Tom Rini
2014-02-11 1:44 ` Vitaly Andrianov
2014-02-12 12:53 ` Tom Rini
2014-02-17 21:19 ` Andrianov, Vitaly
2014-02-17 21:57 ` Tom Rini
2014-02-20 17:27 ` Andrianov, Vitaly
2014-02-10 8:32 ` [U-Boot] [U-Boot: RESEND][PATCH 0/7] Add support for Keystone2 SoC and K2HK EVM Albert ARIBAUD
2014-02-10 17:22 ` Murali Karicheri
2014-02-10 18:01 ` Albert ARIBAUD [this message]
2014-02-10 19:42 ` Murali Karicheri
2014-02-10 19:58 ` Albert ARIBAUD
2014-02-10 21:23 ` Tom Rini
2014-02-20 17:55 ` [U-Boot] [U-Boot PATCH v2 00/12] Add support for keystone2 " Murali Karicheri
2014-02-20 17:55 ` [U-Boot] [U-Boot PATCH v2 01/12] fdt: call ft_board_setup_ex() at the end of image_setup_libfdt() Murali Karicheri
2014-02-25 22:10 ` Tom Rini
2014-02-20 17:55 ` [U-Boot] [U-Boot PATCH v2 02/12] tools: sort the entries in Makefile Murali Karicheri
2014-02-25 22:10 ` Tom Rini
2014-02-20 17:55 ` [U-Boot] [U-Boot PATCH v2 03/12] tools: mkimage: add support for gpimage format Murali Karicheri
2014-02-25 22:11 ` Tom Rini
2014-02-20 17:55 ` [U-Boot] [U-Boot PATCH v2 04/12] arm: add support for arch timer Murali Karicheri
2014-02-25 22:11 ` Tom Rini
2014-02-20 17:55 ` [U-Boot] [U-Boot PATCH v2 05/12] NAND: DaVinci: allow forced disable of subpage writes Murali Karicheri
2014-02-25 22:11 ` Tom Rini
2014-02-26 4:01 ` Scott Wood
2014-02-27 16:38 ` Murali Karicheri
[not found] ` <3E54258959B69E4282D79E01AB1F32B7046C27D5@DFLE11.ent.ti.com>
2014-02-27 19:21 ` Scott Wood
2014-02-27 21:20 ` Murali Karicheri
2014-02-20 17:55 ` [U-Boot] [U-Boot PATCH v2 06/12] i2c, davinci: move i2c_defs.h to the drivers/i2c directory Murali Karicheri
2014-02-25 22:11 ` Tom Rini
2014-02-20 17:55 ` [U-Boot] [U-Boot PATCH v2 07/12] i2c, davinci: add support for multiple i2c buses Murali Karicheri
2014-02-25 22:11 ` Tom Rini
2014-02-20 17:55 ` [U-Boot] [U-Boot PATCH v2 08/12] k2hk: add support for k2hk SOC and EVM Murali Karicheri
2014-02-25 22:11 ` Tom Rini
2014-03-03 18:20 ` Murali Karicheri
2014-03-03 18:29 ` Tom Rini
2014-03-06 19:09 ` Andrianov, Vitaly
2014-03-06 19:29 ` Tom Rini
2014-03-07 16:41 ` Andrianov, Vitaly
2014-03-07 16:50 ` Tom Rini
2014-03-07 21:21 ` Murali Karicheri
2014-03-07 21:27 ` Tom Rini
2014-02-20 17:55 ` [U-Boot] [U-Boot PATCH v2 09/12] keystone2: add keystone multicore navigator driver Murali Karicheri
2014-02-25 22:12 ` Tom Rini
2014-02-20 17:55 ` [U-Boot] [U-Boot PATCH v2 10/12] keystone2: net: add keystone ethernet driver Murali Karicheri
2014-02-25 22:11 ` Tom Rini
2014-03-12 19:04 ` Murali Karicheri
2014-03-12 20:01 ` Tom Rini
2014-02-20 17:55 ` [U-Boot] [U-Boot PATCH v2 11/12] spi: davinci: add support for multiple bus and chip select Murali Karicheri
2014-02-25 22:12 ` Tom Rini
2014-02-20 17:55 ` [U-Boot] [U-Boot PATCH v2 12/12] k2hk-evm: add configuration for spi1 and spi2 support Murali Karicheri
2014-02-25 22:12 ` Tom Rini
2014-02-25 22:10 ` [U-Boot] [U-Boot PATCH v2 00/12] Add support for keystone2 SoC and K2HK EVM Tom Rini
2014-02-27 16:18 ` Karicheri, Muralidharan
2014-03-12 19:21 ` Murali Karicheri
2014-03-12 19:35 ` Tom Rini
2014-02-25 22:49 ` Karicheri, Muralidharan
2014-02-25 22:51 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140210190133.4d95f66a@lilith \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox