From mboxrd@z Thu Jan  1 00:00:00 1970
From: Albert ARIBAUD <albert.u.boot@aribaud.net>
Date: Thu, 13 Feb 2014 16:21:21 +0100
Subject: [U-Boot] [PATCH 8/8] arm/km: introduce kmsugp1 target
In-Reply-To: <1390838309-11672-8-git-send-email-holger.brunck@keymile.com>
References: <1390838309-11672-1-git-send-email-holger.brunck@keymile.com>
	<1390838309-11672-8-git-send-email-holger.brunck@keymile.com>
Message-ID: <20140213162121.4538b0a6@lilith>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Holger,

On Mon, 27 Jan 2014 16:58:29 +0100, Holger Brunck
<holger.brunck@keymile.com> wrote:

> From: Gerlando Falauto <gerlando.falauto@keymile.com>
> 
> KMSUGP1 is from a u-boot perspective (almost) identical to KMNUSA.
> The only difference is that the PCIe reset is connected to Kirkwood pin
> MPP7_PEX_RST_OUTn, we use a dedicated config flag KM_PCIE_RESET_MPP7.
> Such pin should theoretically be handled by the PCIe subsystem
> automatically, but this turned out not to be the case.
> So simply configure this PIN as a GPIO and issue a pulse manually.
> 
> Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
> Cc: Karlheinz Jerg <karlheinz.jerg@keymile.com>
> Cc: Valentin Longchamp <valenting.longchamp@keymile.com>
> Cc: Holger Brunck <holger.brunck@keymile.com>
> ---

This one does not apply properly on u-boot-arm/master. Can you look
into this and post a V2 (of just 8/8) ?

Amicalement,
-- 
Albert.