From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Wed, 19 Feb 2014 15:51:03 -0500 Subject: [U-Boot] [PATCH] kbuild,tegra124: add dummy obj- for Kbuild In-Reply-To: <1392816403-9101-1-git-send-email-yamada.m@jp.panasonic.com> References: <1392816403-9101-1-git-send-email-yamada.m@jp.panasonic.com> Message-ID: <20140219205103.GG19081@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Feb 19, 2014 at 10:26:43PM +0900, Masahiro Yamada wrote: > In Kbuild, every makefile must have non-empty obj- or obj-y. > Otherwise, built-in.o will not be created and the link stage > will fail. > > Signed-off-by: Masahiro Yamada > --- > > Tom, > Please apply this along with the Kbuild series. So with this, I then get: Configuring for venice2 board... make[2]: *** [arch/arm/dts/tegra124-venice2.dtb] Error 1 make[1]: *** [dts/dt.dtb] Error 2 make: *** [sub-make] Error 2 text data bss dec hex filename 260562 15030 309960 585552 8ef50 venice2/u-boot 18527 421 72 19020 4a4c venice2/spl/u-boot-spl Device Tree Source is not correctly specified. Please define 'CONFIG_DEFAULT_DEVICE_TREE' or build with 'DEVICE_TREE=' argument make[2]: *** [arch/arm/dts/tegra124-venice2.dtb] Error 1 make[1]: *** [dts/dt.dtb] Error 2 make: *** [sub-make] Error 2 --------------------- SUMMARY ---------------------------- Boards compiled: 1 Boards with errors: 1 ( venice2 ) ---------------------------------------------------------- What's going on as the config file sets CONFIG_DEFAULT_DEVICE_TREE -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: