From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Fri, 21 Mar 2014 14:48:49 -0400 Subject: [U-Boot] [PATCH 2/6] add header with a generic set of boot commands defined. In-Reply-To: <1395353581-5839-3-git-send-email-dennis@ausil.us> References: <1392659798-1665-1-git-send-email-dennis@ausil.us> <1395353581-5839-1-git-send-email-dennis@ausil.us> <1395353581-5839-3-git-send-email-dennis@ausil.us> Message-ID: <20140321184849.GO16360@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, Mar 20, 2014 at 05:12:57PM -0500, Dennis Gilmore wrote: > As the next step in a generic config we are introducing a set of generic boot > paramaters. Depending on the hardwares configuration, booting from supported > hardware will be enabled, mmc, usb, sata, scsi, ide, pxe and dhcp. > > There is nothing to stop this being extended to support nand and any other > type of storage that comes along. An ideal future enhancement will be to > allow the user to dynamically reorder the boot devices, and allow one off > boots. for example simply be able to pxe boot to reinstall [snip] > + "bootcmd_mmc0=setenv devnum 0; run mmc_boot;\0" \ > + "bootcmd_mmc1=setenv devnum 1; run mmc_boot;\0" > +#define BOOT_TARGETS_MMC "mmc1 mmc0" This is because we want to prefer eMMC to SD card? Or is mmc1=SD, mmc0=eMMC on Tegra? That's opposite of TI parts so we might need to #ifndef/define/endif that combo at least. Otherwise: Reviewed-by: Tom Rini -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: