From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/6] add header with a generic set of boot commands defined.
Date: Fri, 21 Mar 2014 19:37:52 +0100 [thread overview]
Message-ID: <201403211937.52314.marex@denx.de> (raw)
In-Reply-To: <1395353581-5839-3-git-send-email-dennis@ausil.us>
On Thursday, March 20, 2014 at 11:12:57 PM, Dennis Gilmore wrote:
> As the next step in a generic config we are introducing a set of generic
> boot paramaters. Depending on the hardwares configuration, booting from
> supported hardware will be enabled, mmc, usb, sata, scsi, ide, pxe and
> dhcp.
>
> There is nothing to stop this being extended to support nand and any other
> type of storage that comes along. An ideal future enhancement will be to
> allow the user to dynamically reorder the boot devices, and allow one off
> boots. for example simply be able to pxe boot to reinstall
>
> Signed-off-by: Dennis Gilmore <dennis@ausil.us>
> ---
> include/config_distro_bootcmd.h | 208
> ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 208 insertions(+)
> create mode 100644 include/config_distro_bootcmd.h
>
> diff --git a/include/config_distro_bootcmd.h
> b/include/config_distro_bootcmd.h new file mode 100644
> index 0000000..0fe94be
> --- /dev/null
> +++ b/include/config_distro_bootcmd.h
> @@ -0,0 +1,208 @@
> +/*
> + * (C) Copyright 2014
> + * NVIDIA Corporation <www.nvidia.com>
> + *
> + * Copyright 2014 Red Hat, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef _CONFIG_CMD_DISTRO_BOOTCMD_H
> +#define _CONFIG_CMD_DISTRO_BOOTCMD_H
> +
> +
> +#ifdef CONFIG_CMD_MMC
> +#define BOOTCMDS_MMC \
> + "mmc_boot=" \
> + "setenv devtype mmc; " \
Please use 'env set ...'
> + "if mmc dev ${devnum}; then " \
> + "run scan_boot; " \
> + "fi\0" \
> + "bootcmd_mmc0=setenv devnum 0; run mmc_boot;\0" \
> + "bootcmd_mmc1=setenv devnum 1; run mmc_boot;\0"
> +#define BOOT_TARGETS_MMC "mmc1 mmc0"
This will not work on a boot with three MMC cards ... this does not scale and
needs re-thinking.
> +#else
> +#define BOOTCMDS_MMC ""
> +#define BOOT_TARGETS_MMC ""
You need to #undef those after you assembled the env, otherwise you will
propagate those throughout the rest of the U-Boot at build time, which is not
nice.
[...]
next prev parent reply other threads:[~2014-03-21 18:37 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-17 17:56 [U-Boot] RFC unified boot environment Dennis Gilmore
2014-02-17 17:56 ` [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work Dennis Gilmore
2014-02-19 13:42 ` Tom Rini
2014-02-19 13:57 ` Dennis Gilmore
2014-02-19 15:54 ` Marek Vasut
2014-02-19 17:28 ` Stephen Warren
2014-02-19 17:30 ` Marek Vasut
2014-02-19 17:41 ` Stephen Warren
2014-02-19 17:44 ` Marek Vasut
2014-02-19 17:40 ` Stephen Warren
2014-02-22 8:20 ` Dennis Gilmore
2014-02-24 18:40 ` Stephen Warren
2014-02-24 20:07 ` Tom Rini
2014-02-19 18:44 ` Dan Murphy
2014-02-19 18:48 ` Stephen Warren
2014-02-19 18:52 ` Dan Murphy
2014-02-19 18:57 ` Stephen Warren
2014-02-19 18:59 ` Dan Murphy
2014-02-19 19:04 ` Stephen Warren
2014-02-19 19:10 ` Tom Rini
2014-02-19 19:16 ` Stephen Warren
2014-02-19 19:36 ` Tom Rini
2014-02-19 19:43 ` Stephen Warren
2014-02-19 19:57 ` Tom Rini
2014-02-19 20:10 ` Dennis Gilmore
2014-02-19 19:32 ` Dan Murphy
2014-02-19 19:38 ` Stephen Warren
2014-02-19 20:03 ` Dan Murphy
2014-02-19 19:02 ` Eric Nelson
2014-02-19 19:05 ` Dan Murphy
2014-02-19 19:16 ` Tom Rini
2014-02-19 19:24 ` Dan Murphy
2014-02-19 19:29 ` Stephen Warren
2014-02-19 19:37 ` Dan Murphy
2014-02-19 19:43 ` Tom Rini
2014-02-19 19:41 ` Tom Rini
2014-02-19 21:20 ` Denys Dmytriyenko
2014-02-20 12:31 ` Otavio Salvador
2014-02-20 13:46 ` Tom Rini
2014-02-22 12:56 ` Otavio Salvador
2014-02-17 17:56 ` [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs Dennis Gilmore
2014-02-19 13:52 ` Tom Rini
2014-02-19 17:46 ` Stephen Warren
2014-02-19 19:57 ` Dan Murphy
2014-02-19 19:58 ` Dan Murphy
2014-02-19 20:05 ` Stephen Warren
2014-02-19 20:20 ` Dan Murphy
2014-02-19 20:22 ` Stephen Warren
2014-02-19 20:31 ` Dan Murphy
2014-02-19 20:38 ` Stephen Warren
2014-02-19 20:58 ` Dan Murphy
2014-02-19 21:07 ` Dennis Gilmore
2014-02-17 17:56 ` [U-Boot] [RFC PATCH 3/3] move wandboard over to use the generic distro configuratin and environment Dennis Gilmore
2014-02-19 11:52 ` Otavio Salvador
2014-02-19 17:50 ` Stephen Warren
2014-02-18 10:18 ` [U-Boot] RFC unified boot environment Stefano Babic
2014-02-18 16:09 ` Dennis Gilmore
2014-02-19 13:33 ` Tom Rini
2014-03-20 22:12 ` [U-Boot] [PATCH 0/6] " Dennis Gilmore
2014-03-20 22:12 ` [U-Boot] [PATCH 1/6] add README.distro file Dennis Gilmore
2014-03-21 18:48 ` Tom Rini
2014-03-25 20:40 ` Stephen Warren
2014-03-25 20:24 ` Stephen Warren
2014-03-28 15:42 ` Tom Rini
2014-03-28 16:11 ` Stephen Warren
2014-03-28 16:25 ` Tom Rini
2014-03-20 22:12 ` [U-Boot] [PATCH 2/6] add header with a generic set of boot commands defined Dennis Gilmore
2014-03-21 18:37 ` Marek Vasut [this message]
2014-03-21 18:53 ` Tom Rini
2014-03-21 21:00 ` Marek Vasut
2014-03-21 18:48 ` Tom Rini
2014-03-25 20:38 ` Stephen Warren
2014-03-25 20:36 ` Stephen Warren
2014-03-20 22:12 ` [U-Boot] [PATCH 3/6] move wandboard over to use the generic distro configuation and environment Dennis Gilmore
2014-03-20 22:12 ` [U-Boot] [PATCH 4/6] move beagleboard " Dennis Gilmore
2014-03-21 18:48 ` Tom Rini
2014-03-20 22:13 ` [U-Boot] [PATCH 5/6] move pandaboard " Dennis Gilmore
2014-03-21 18:49 ` Tom Rini
2014-03-20 22:13 ` [U-Boot] [PATCH 6/6] pxe: additionaly check for fdt_file env variable Dennis Gilmore
2014-03-21 18:49 ` Tom Rini
2014-03-25 20:45 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201403211937.52314.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox