[U-Boot] [PATCH v2 1/9] sunxi: initial sun7i clocks and timer support.

[Marek Vasut <marex@denx.de>]

On Monday, March 24, 2014 at 11:42:17 PM, Olliver Schinagl wrote:
> On 03/24/2014 09:52 PM, Marek Vasut wrote:
> > On Friday, March 21, 2014 at 10:54:18 PM, Ian Campbell wrote:
> >> This has been stripped back for mainlining and supports only sun7i.
> >> These changes are not useful by themselves but are split out to make
> >> the patch sizes more manageable.
> > 
> > [...]
> > 
> >> +int clock_init(void)
> >> +{
> >> +	struct sunxi_ccm_reg *const ccm =
> >> +		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
> >> +
> >> +#ifdef CONFIG_SPL_BUILD
> >> +	clock_init_safe();
> >> +#endif
> >> +
> >> +	/* uart clock source is apb1 */
> >> +	sr32(&ccm->apb1_clk_div_cfg, 24, 2, APB1_CLK_SRC_OSC24M);
> >> +	sr32(&ccm->apb1_clk_div_cfg, 16, 2, APB1_FACTOR_N);
> >> +	sr32(&ccm->apb1_clk_div_cfg, 0, 5, APB1_FACTOR_M);
> > 
> > sr32() is not defined anywhere.
> 
> it should be defined in
> arch/arm/include/asm/arch-sunxi/sys_proto.h
> and comes from
> arch/arm/cpu/armv7/syslib.c
> 
> it was added for the ti omap's
> 
> I've got a local cleanup patch set where I fixed this already to
> clrsetbits_le32

It's not part of this patch, but then, use clrsetbits_le32() instead of course.

> >> +	/* open the clock for uart */
> >> +	sr32(&ccm->apb1_gate, 16 + CONFIG_CONS_INDEX - 1, 1, CLK_GATE_OPEN);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +/* Return PLL5 frequency in Hz
> >> + * Note: Assumes PLL5 reference is 24MHz clock
> >> + */
> >> +unsigned int clock_get_pll5(void)
> >> +{
> >> +	struct sunxi_ccm_reg *const ccm =
> >> +		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
> >> +	uint32_t rval = readl(&ccm->pll5_cfg);
> >> +	int n = (rval >> 8) & 0x1f;
> >> +	int k = ((rval >> 4) & 3) + 1;
> >> +	int p = 1 << ((rval >> 16) & 3);
> >> +	return 24000000 * n * k / p;
> > 
> > Please fix the magic values here.
> > [...]
> 
> Same here, got that in my local tree too

Then make it part of the V3 please.

[...]