[U-Boot] [PATCH v3 01/10] fw_env.c: Switch get_config to use '%ms' in sscanf

[U-Boot] [PATCH v3 01/10] fw_env.c: Switch get_config to use '%ms' in sscanf

[Tom Rini]

We currently limit ourself to 16 characters for the device name to read
the environment from.  This is insufficient for /dev/mmcblk0boot1 to
work for example.  Switch to '%ms' which gives us a dynamically
allocated buffer instead.  We're short lived enough to not bother
free()ing the buffer.

Signed-off-by: Tom Rini <trini@ti.com>

---
Changes in v2:
- Rework to use '%ms' in get_config per Wolfgang

Signed-off-by: Tom Rini <trini@ti.com>
---
 tools/env/fw_env.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index d228cc3..f5cd521 100644
--- a/tools/env/fw_env.c
+++ b/tools/env/fw_env.c
@@ -40,7 +40,7 @@
 	_min1 < _min2 ? _min1 : _min2; })
 
 struct envdev_s {
-	char devname[16];		/* Device name */
+	const char *devname;		/* Device name */
 	ulong devoff;			/* Device offset */
 	ulong env_size;			/* environment size */
 	ulong erase_size;		/* device erase size */
@@ -1243,7 +1243,7 @@ static int parse_config ()
 		return -1;
 	}
 #else
-	strcpy (DEVNAME (0), DEVICE1_NAME);
+	DEVNAME (0) = DEVICE1_NAME;
 	DEVOFFSET (0) = DEVICE1_OFFSET;
 	ENVSIZE (0) = ENV1_SIZE;
 	/* Default values are: erase-size=env-size */
@@ -1258,7 +1258,7 @@ static int parse_config ()
 #endif
 
 #ifdef HAVE_REDUND
-	strcpy (DEVNAME (1), DEVICE2_NAME);
+	DEVNAME (1) = DEVICE2_NAME;
 	DEVOFFSET (1) = DEVICE2_OFFSET;
 	ENVSIZE (1) = ENV2_SIZE;
 	/* Default values are: erase-size=env-size */
@@ -1297,6 +1297,7 @@ static int get_config (char *fname)
 	int i = 0;
 	int rc;
 	char dump[128];
+	char *devname;
 
 	fp = fopen (fname, "r");
 	if (fp == NULL)
@@ -1307,8 +1308,8 @@ static int get_config (char *fname)
 		if (dump[0] == '#')
 			continue;
 
-		rc = sscanf (dump, "%s %lx %lx %lx %lx",
-			     DEVNAME (i),
+		rc = sscanf (dump, "%ms %lx %lx %lx %lx",
+			     &devname,
 			     &DEVOFFSET (i),
 			     &ENVSIZE (i),
 			     &DEVESIZE (i),
@@ -1317,6 +1318,8 @@ static int get_config (char *fname)
 		if (rc < 3)
 			continue;
 
+		DEVNAME(i) = devname;
+
 		if (rc < 4)
 			/* Assume the erase size is the same as the env-size */
 			DEVESIZE(i) = ENVSIZE(i);
-- 
1.7.9.5

[U-Boot] [PATCH v3 02/10] env_mmc.c: Allow environment to be used within SPL

[Tom Rini]

Inside of SPL we only concern ourself with one MMC device, so instead of
being able to use CONFIG_SYS_MMC_ENV_DEV we need to use 0 in SPL.
Switch the code to use a 'dev' variable to facilitate this.

Signed-off-by: Tom Rini <trini@ti.com>
---
 common/env_mmc.c |   45 +++++++++++++++++++++++++++++++++++++--------
 1 file changed, 37 insertions(+), 8 deletions(-)

diff --git a/common/env_mmc.c b/common/env_mmc.c
index 045428c..d42168b 100644
--- a/common/env_mmc.c
+++ b/common/env_mmc.c
@@ -64,6 +64,14 @@ int env_init(void)
 
 static int init_mmc_for_env(struct mmc *mmc)
 {
+#ifdef CONFIG_SYS_MMC_ENV_PART
+	int dev = CONFIG_SYS_MMC_ENV_DEV;
+
+#ifdef CONFIG_SPL_BUILD
+	dev = 0;
+#endif
+#endif
+
 	if (!mmc) {
 		puts("No MMC card found\n");
 		return -1;
@@ -76,8 +84,7 @@ static int init_mmc_for_env(struct mmc *mmc)
 
 #ifdef CONFIG_SYS_MMC_ENV_PART
 	if (CONFIG_SYS_MMC_ENV_PART != mmc->part_num) {
-		if (mmc_switch_part(CONFIG_SYS_MMC_ENV_DEV,
-				    CONFIG_SYS_MMC_ENV_PART)) {
+		if (mmc_switch_part(dev, CONFIG_SYS_MMC_ENV_PART)) {
 			puts("MMC partition switch failed\n");
 			return -1;
 		}
@@ -90,9 +97,13 @@ static int init_mmc_for_env(struct mmc *mmc)
 static void fini_mmc_for_env(struct mmc *mmc)
 {
 #ifdef CONFIG_SYS_MMC_ENV_PART
+	int dev = CONFIG_SYS_MMC_ENV_DEV;
+
+#ifdef CONFIG_SPL_BUILD
+	dev = 0;
+#endif
 	if (CONFIG_SYS_MMC_ENV_PART != mmc->part_num)
-		mmc_switch_part(CONFIG_SYS_MMC_ENV_DEV,
-				mmc->part_num);
+		mmc_switch_part(dev, mmc->part_num);
 #endif
 }
 
@@ -174,12 +185,16 @@ static inline int read_env(struct mmc *mmc, unsigned long size,
 			   unsigned long offset, const void *buffer)
 {
 	uint blk_start, blk_cnt, n;
+	int dev = CONFIG_SYS_MMC_ENV_DEV;
+
+#ifdef CONFIG_SPL_BUILD
+	dev = 0;
+#endif
 
 	blk_start	= ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
 	blk_cnt		= ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
 
-	n = mmc->block_dev.block_read(CONFIG_SYS_MMC_ENV_DEV, blk_start,
-					blk_cnt, (uchar *)buffer);
+	n = mmc->block_dev.block_read(dev, blk_start, blk_cnt, (uchar *)buffer);
 
 	return (n == blk_cnt) ? 0 : -1;
 }
@@ -188,16 +203,23 @@ static inline int read_env(struct mmc *mmc, unsigned long size,
 void env_relocate_spec(void)
 {
 #if !defined(ENV_IS_EMBEDDED)
-	struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
+	struct mmc *mmc;
 	u32 offset1, offset2;
 	int read1_fail = 0, read2_fail = 0;
 	int crc1_ok = 0, crc2_ok = 0;
 	env_t *ep;
 	int ret;
+	int dev = CONFIG_SYS_MMC_ENV_DEV;
 
 	ALLOC_CACHE_ALIGN_BUFFER(env_t, tmp_env1, 1);
 	ALLOC_CACHE_ALIGN_BUFFER(env_t, tmp_env2, 1);
 
+#ifdef CONFIG_SPL_BUILD
+	dev = 0;
+#endif
+
+	mmc = find_mmc_device(dev);
+
 	if (tmp_env1 == NULL || tmp_env2 == NULL) {
 		puts("Can't allocate buffers for environment\n");
 		ret = 1;
@@ -274,9 +296,16 @@ void env_relocate_spec(void)
 {
 #if !defined(ENV_IS_EMBEDDED)
 	ALLOC_CACHE_ALIGN_BUFFER(char, buf, CONFIG_ENV_SIZE);
-	struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
+	struct mmc *mmc;
 	u32 offset;
 	int ret;
+	int dev = CONFIG_SYS_MMC_ENV_DEV;
+
+#ifdef CONFIG_SPL_BUILD
+	dev = 0;
+#endif
+
+	mmc = find_mmc_device(dev);
 
 	if (init_mmc_for_env(mmc)) {
 		ret = 1;
-- 
1.7.9.5

[U-Boot] [PATCH v3 03/10] env_mmc.c: Remove NULL check on tmp_env1/2

[Tom Rini]

With 452a272 we moved to allocating these variables on the stack.  So
they will never now be NULL so remove these checks.

Signed-off-by: Tom Rini <trini@ti.com>
---
 common/env_mmc.c |    6 ------
 1 file changed, 6 deletions(-)

diff --git a/common/env_mmc.c b/common/env_mmc.c
index d42168b..f47bd77 100644
--- a/common/env_mmc.c
+++ b/common/env_mmc.c
@@ -220,12 +220,6 @@ void env_relocate_spec(void)
 
 	mmc = find_mmc_device(dev);
 
-	if (tmp_env1 == NULL || tmp_env2 == NULL) {
-		puts("Can't allocate buffers for environment\n");
-		ret = 1;
-		goto err;
-	}
-
 	if (init_mmc_for_env(mmc)) {
 		ret = 1;
 		goto err;
-- 
1.7.9.5

[U-Boot] [PATCH v3 04/10] mtd: Add a CONFIG_SPL_MTD_SUPPORT for a more full NAND subsystem in SPL

[Tom Rini]

This mainly converts the am335x_spl_bch driver to the "normal" format
which means a slight change to nand_info within the driver.

Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Tom Rini <trini@ti.com>
---
Changes in v2:
- Document CONFIG_SPL_MTD_SUPPORT in the README
---
 README                            |    4 +++
 drivers/mtd/nand/am335x_spl_bch.c |   54 ++++++++++++++++++-------------------
 include/configs/ti_armv7_common.h |    1 +
 spl/Makefile                      |    1 +
 4 files changed, 33 insertions(+), 27 deletions(-)

diff --git a/README b/README
index 216f0c7..b035033 100644
--- a/README
+++ b/README
@@ -3314,6 +3314,10 @@ FIT uImage format:
 		Support for NAND boot using simple NAND drivers that
 		expose the cmd_ctrl() interface.
 
+		CONFIG_SPL_MTD_SUPPORT
+		Support for the MTD subsystem within SPL.  Useful for
+		environment on NAND support within SPL.
+
 		CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 		Set for the SPL on PPC mpc8xxx targets, support for
 		drivers/ddr/fsl/libddr.o in SPL binary.
diff --git a/drivers/mtd/nand/am335x_spl_bch.c b/drivers/mtd/nand/am335x_spl_bch.c
index c84851b..bd89b06 100644
--- a/drivers/mtd/nand/am335x_spl_bch.c
+++ b/drivers/mtd/nand/am335x_spl_bch.c
@@ -16,7 +16,7 @@
 #include <linux/mtd/nand_ecc.h>
 
 static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS;
-static nand_info_t mtd;
+nand_info_t nand_info[1];
 static struct nand_chip nand_chip;
 
 #define ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
@@ -30,12 +30,12 @@ static struct nand_chip nand_chip;
 static int nand_command(int block, int page, uint32_t offs,
 	u8 cmd)
 {
-	struct nand_chip *this = mtd.priv;
+	struct nand_chip *this = nand_info[0].priv;
 	int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
 	void (*hwctrl)(struct mtd_info *mtd, int cmd,
 			unsigned int ctrl) = this->cmd_ctrl;
 
-	while (!this->dev_ready(&mtd))
+	while (!this->dev_ready(&nand_info[0]))
 		;
 
 	/* Emulate NAND_CMD_READOOB */
@@ -45,11 +45,11 @@ static int nand_command(int block, int page, uint32_t offs,
 	}
 
 	/* Begin command latch cycle */
-	hwctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+	hwctrl(&nand_info[0], cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
 
 	if (cmd == NAND_CMD_RESET) {
-		hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
-		while (!this->dev_ready(&mtd))
+		hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+		while (!this->dev_ready(&nand_info[0]))
 			;
 		return 0;
 	}
@@ -60,35 +60,35 @@ static int nand_command(int block, int page, uint32_t offs,
 
 	/* Set ALE and clear CLE to start address cycle */
 	/* Column address */
-	hwctrl(&mtd, offs & 0xff,
+	hwctrl(&nand_info[0], offs & 0xff,
 		       NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */
-	hwctrl(&mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */
+	hwctrl(&nand_info[0], (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */
 	/* Row address */
-	hwctrl(&mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */
-	hwctrl(&mtd, ((page_addr >> 8) & 0xff),
+	hwctrl(&nand_info[0], (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */
+	hwctrl(&nand_info[0], ((page_addr >> 8) & 0xff),
 		       NAND_CTRL_ALE); /* A[27:20] */
 #ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
 	/* One more address cycle for devices > 128MiB */
-	hwctrl(&mtd, (page_addr >> 16) & 0x0f,
+	hwctrl(&nand_info[0], (page_addr >> 16) & 0x0f,
 		       NAND_CTRL_ALE); /* A[31:28] */
 #endif
-	hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+	hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
 
 	if (cmd == NAND_CMD_READ0) {
 		/* Latch in address */
-		hwctrl(&mtd, NAND_CMD_READSTART,
+		hwctrl(&nand_info[0], NAND_CMD_READSTART,
 			   NAND_CTRL_CLE | NAND_CTRL_CHANGE);
-		hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+		hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
 
 		/*
 		 * Wait a while for the data to be ready
 		 */
-		while (!this->dev_ready(&mtd))
+		while (!this->dev_ready(&nand_info[0]))
 			;
 	} else if (cmd == NAND_CMD_RNDOUT) {
-		hwctrl(&mtd, NAND_CMD_RNDOUTSTART, NAND_CTRL_CLE |
+		hwctrl(&nand_info[0], NAND_CMD_RNDOUTSTART, NAND_CTRL_CLE |
 					NAND_CTRL_CHANGE);
-		hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+		hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
 	}
 
 	return 0;
@@ -96,7 +96,7 @@ static int nand_command(int block, int page, uint32_t offs,
 
 static int nand_is_bad_block(int block)
 {
-	struct nand_chip *this = mtd.priv;
+	struct nand_chip *this = nand_info[0].priv;
 
 	nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS,
 		NAND_CMD_READOOB);
@@ -117,7 +117,7 @@ static int nand_is_bad_block(int block)
 
 static int nand_read_page(int block, int page, void *dst)
 {
-	struct nand_chip *this = mtd.priv;
+	struct nand_chip *this = nand_info[0].priv;
 	u_char ecc_calc[ECCTOTAL];
 	u_char ecc_code[ECCTOTAL];
 	u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
@@ -133,15 +133,15 @@ static int nand_read_page(int block, int page, void *dst)
 	nand_command(block, page, 0, NAND_CMD_READ0);
 
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
-		this->ecc.hwctl(&mtd, NAND_ECC_READ);
+		this->ecc.hwctl(&nand_info[0], NAND_ECC_READ);
 		nand_command(block, page, data_pos, NAND_CMD_RNDOUT);
 
-		this->read_buf(&mtd, p, eccsize);
+		this->read_buf(&nand_info[0], p, eccsize);
 
 		nand_command(block, page, oob_pos, NAND_CMD_RNDOUT);
 
-		this->read_buf(&mtd, oob, eccbytes);
-		this->ecc.calculate(&mtd, p, &ecc_calc[i]);
+		this->read_buf(&nand_info[0], oob, eccbytes);
+		this->ecc.calculate(&nand_info[0], p, &ecc_calc[i]);
 
 		data_pos += eccsize;
 		oob_pos += eccbytes;
@@ -160,7 +160,7 @@ static int nand_read_page(int block, int page, void *dst)
 		 * from correct_data(). We just hope that all possible errors
 		 * are corrected by this routine.
 		 */
-		this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]);
+		this->ecc.correct(&nand_info[0], p, &ecc_code[i], &ecc_calc[i]);
 	}
 
 	return 0;
@@ -206,13 +206,13 @@ void nand_init(void)
 	/*
 	 * Init board specific nand support
 	 */
-	mtd.priv = &nand_chip;
+	nand_info[0].priv = &nand_chip;
 	nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
 		(void  __iomem *)CONFIG_SYS_NAND_BASE;
 	board_nand_init(&nand_chip);
 
 	if (nand_chip.select_chip)
-		nand_chip.select_chip(&mtd, 0);
+		nand_chip.select_chip(&nand_info[0], 0);
 
 	/* NAND chip may require reset after power-on */
 	nand_command(0, 0, 0, NAND_CMD_RESET);
@@ -222,5 +222,5 @@ void nand_init(void)
 void nand_deselect(void)
 {
 	if (nand_chip.select_chip)
-		nand_chip.select_chip(&mtd, -1);
+		nand_chip.select_chip(&nand_info[0], -1);
 }
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index cb972f4..c45c691 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -247,6 +247,7 @@
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_MTD_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 #endif
diff --git a/spl/Makefile b/spl/Makefile
index be5fd3b..ce2e55e 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -104,6 +104,7 @@ libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/
 libs-y += fs/
 libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
 libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/
+libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/
 libs-$(if $(CONFIG_CMD_NAND),$(CONFIG_SPL_NAND_SUPPORT)) += drivers/mtd/nand/
 libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/
 libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
-- 
1.7.9.5

[U-Boot] [PATCH v3 05/10] mtd: Build nand_util.o for CONFIG_ENV_IS_IN_NAND in SPL

[Tom Rini]

Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Tom Rini <trini@ti.com>
---
Changes in v2:
- Surround adding nand_util.o with CONFIG_SPL_ENV_SUPPORT test
---
 drivers/mtd/nand/Makefile |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 02b149c..4eb354d 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -18,6 +18,9 @@ obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
 obj-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
 obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o
 obj-$(CONFIG_SPL_NAND_INIT) += nand.o
+ifeq ($(CONFIG_SPL_ENV_SUPPORT),y)
+obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o
+endif
 
 else # not spl
 
-- 
1.7.9.5

[U-Boot] [PATCH v3 06/10] am335x_evm: Make SPL_OS also check the boot_os variable for falcon mode

[Tom Rini]

We use the same variable as a3m071 in the environment to determine if we
should boot into Linux or U-Boot.  This is useful on boards like
Beaglebone Black or AM335x GP EVM where we have persistent storage for
the environment.

Signed-off-by: Tom Rini <trini@ti.com>
---
 board/ti/am335x/board.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 554398f..ce7a8b0 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -30,6 +30,7 @@
 #include <power/tps65910.h>
 #include <environment.h>
 #include <watchdog.h>
+#include <environment.h>
 #include "board.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -219,7 +220,17 @@ static struct emif_regs ddr3_evm_emif_reg_data = {
 int spl_start_uboot(void)
 {
 	/* break into full u-boot on 'c' */
-	return (serial_tstc() && serial_getc() == 'c');
+	if (serial_tstc() && serial_getc() == 'c')
+		return 1;
+
+#ifdef CONFIG_SPL_ENV_SUPPORT
+	env_init();
+	env_relocate_spec();
+	if (getenv_yesno("boot_os") != 1)
+		return 1;
+#endif
+
+	return 0;
 }
 #endif
 
-- 
1.7.9.5

[U-Boot] [PATCH v3 07/10] README: Add CONFIG_SPL_OS_BOOT to README

[Tom Rini]

Signed-off-by: Tom Rini <trini@ti.com>
---
 README |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/README b/README
index b035033..56ecaa1 100644
--- a/README
+++ b/README
@@ -3242,6 +3242,10 @@ FIT uImage format:
 		supports MMC, NAND and YMODEM loading of U-Boot and NAND
 		NAND loading of the Linux Kernel.
 
+		CONFIG_SPL_OS_BOOT
+		Enable booting directly to an OS from SPL.
+		See also: doc/README.falcon
+
 		CONFIG_SPL_DISPLAY_PRINT
 		For ARM, enable an optional function to print more information
 		about the running system.
-- 
1.7.9.5

[U-Boot] [PATCH v3 08/10] README.falcon: Document environment variables for falcon mode

[Tom Rini]

Signed-off-by: Tom Rini <trini@ti.com>
---
 doc/README.falcon |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/doc/README.falcon b/doc/README.falcon
index 6357b1e..bccf6c9 100644
--- a/doc/README.falcon
+++ b/doc/README.falcon
@@ -80,6 +80,15 @@ spl_start_uboot() : required
 		Returns "0" if SPL should start the kernel, "1" if U-Boot
 		must be started.
 
+Environment variables
+---------------------
+
+A board may chose to look at the environment for decisions about falcon
+mode.  In this case the following variables may be supported:
+
+boot_os : 		Set to yes/Yes/true/True/1 to enable booting to OS,
+			any other value to fall back to U-Boot (including
+			unset)
 
 Using spl command
 -----------------
-- 
1.7.9.5

[U-Boot] [PATCH v3 09/10] a3m071: Make spl_start_uboot test like getenv_yesno does

[Tom Rini]

This change makes the behaviour slightly more rebust and will match
other implementations which can use getenv_yesno directly.

Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
---
 board/a3m071/a3m071.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/board/a3m071/a3m071.c b/board/a3m071/a3m071.c
index 7aeefb2..b96ba81 100644
--- a/board/a3m071/a3m071.c
+++ b/board/a3m071/a3m071.c
@@ -412,7 +412,8 @@ int spl_start_uboot(void)
 
 	env_init();
 	getenv_f("boot_os", s, sizeof(s));
-	if ((s != NULL) && (strcmp(s, "yes") == 0))
+	if ((s != NULL) && (*s == '1' || *s == 'y' || *s == 'Y' ||
+			    *s == 't' || *s == 'T'))
 		return 0;
 
 	return 1;
-- 
1.7.9.5

[U-Boot] [PATCH v3 10/10] spl_mmc/CONFIG_SPL_OS_BOOT: Allow environment to determine what to boot

[Tom Rini]

We add two new environment variables, falcon_args_file and
falcon_image_file, which when set will override the compiled in default
values for falcon mode.

Signed-off-by: Tom Rini <trini@ti.com>
---
 common/spl/spl_fat.c |   27 +++++++++++++++++++++++++++
 doc/README.falcon    |    4 ++++
 2 files changed, 31 insertions(+)

diff --git a/common/spl/spl_fat.c b/common/spl/spl_fat.c
index 1e532d5..56be943 100644
--- a/common/spl/spl_fat.c
+++ b/common/spl/spl_fat.c
@@ -74,11 +74,38 @@ end:
 int spl_load_image_fat_os(block_dev_desc_t *block_dev, int partition)
 {
 	int err;
+	__maybe_unused char *file;
 
 	err = spl_register_fat_device(block_dev, partition);
 	if (err)
 		return err;
 
+#if defined(CONFIG_SPL_ENV_SUPPORT) && defined(CONFIG_SPL_OS_BOOT)
+	file = getenv("falcon_args_file");
+	if (file) {
+		err = file_fat_read(file, (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0);
+		if (err <= 0) {
+			printf("spl: error reading image %s, err - %d, falling back to default\n",
+			       file, err);
+			goto defaults;
+		}
+		file = getenv("falcon_image_file");
+		if (file) {
+			err = spl_load_image_fat(block_dev, partition, file);
+			if (err != 0) {
+				puts("spl: falling back to default\n");
+				goto defaults;
+			}
+
+			return 0;
+		} else
+			puts("spl: falcon_image_file not set in environment, falling back to default\n");
+	} else
+		puts("spl: falcon_args_file not set in environment, falling back to default\n");
+
+defaults:
+#endif
+
 	err = file_fat_read(CONFIG_SPL_FAT_LOAD_ARGS_NAME,
 			    (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0);
 	if (err <= 0) {
diff --git a/doc/README.falcon b/doc/README.falcon
index bccf6c9..82a254b 100644
--- a/doc/README.falcon
+++ b/doc/README.falcon
@@ -89,6 +89,10 @@ mode.  In this case the following variables may be supported:
 boot_os : 		Set to yes/Yes/true/True/1 to enable booting to OS,
 			any other value to fall back to U-Boot (including
 			unset)
+falcon_args_file :	Filename to load as the 'args' portion of falcon mode
+			rather than the hard-coded value.
+falcon_image_file :	Filename to load as the OS image portion of falcon
+			mode rather than the hard-coded value.
 
 Using spl command
 -----------------
-- 
1.7.9.5

[U-Boot] [U-Boot, v3, 01/10] fw_env.c: Switch get_config to use '%ms' in sscanf

[Tom Rini]

On Fri, Mar 28, 2014 at 12:03:33PM -0400, Tom Rini wrote:

> We currently limit ourself to 16 characters for the device name to read
> the environment from.  This is insufficient for /dev/mmcblk0boot1 to
> work for example.  Switch to '%ms' which gives us a dynamically
> allocated buffer instead.  We're short lived enough to not bother
> free()ing the buffer.
> 
> Signed-off-by: Tom Rini <trini@ti.com>

Applied to u-boot-ti/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140418/e6987504/attachment.pgp>

[U-Boot] [U-Boot, v3, 02/10] env_mmc.c: Allow environment to be used within SPL

[Tom Rini]

On Fri, Mar 28, 2014 at 12:03:34PM -0400, Tom Rini wrote:

> Inside of SPL we only concern ourself with one MMC device, so instead of
> being able to use CONFIG_SYS_MMC_ENV_DEV we need to use 0 in SPL.
> Switch the code to use a 'dev' variable to facilitate this.
> 
> Signed-off-by: Tom Rini <trini@ti.com>

Applied to u-boot-ti/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140418/6ac39a26/attachment.pgp>

[U-Boot] [U-Boot, v3, 03/10] env_mmc.c: Remove NULL check on tmp_env1/2

[Tom Rini]

On Fri, Mar 28, 2014 at 12:03:35PM -0400, Tom Rini wrote:

> With 452a272 we moved to allocating these variables on the stack.  So
> they will never now be NULL so remove these checks.
> 
> Signed-off-by: Tom Rini <trini@ti.com>

Applied to u-boot-ti/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140418/8a60ba69/attachment.pgp>

[U-Boot] [U-Boot, v3, 04/10] mtd: Add a CONFIG_SPL_MTD_SUPPORT for a more full NAND subsystem in SPL

[Tom Rini]

On Fri, Mar 28, 2014 at 12:03:36PM -0400, Tom Rini wrote:

> This mainly converts the am335x_spl_bch driver to the "normal" format
> which means a slight change to nand_info within the driver.
> 
> Acked-by: Scott Wood <scottwood@freescale.com>
> Signed-off-by: Tom Rini <trini@ti.com>

Applied to u-boot-ti/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140418/d0adb009/attachment.pgp>

[U-Boot] [U-Boot, v3, 05/10] mtd: Build nand_util.o for CONFIG_ENV_IS_IN_NAND in SPL

[Tom Rini]

On Fri, Mar 28, 2014 at 12:03:37PM -0400, Tom Rini wrote:

> Acked-by: Scott Wood <scottwood@freescale.com>
> Signed-off-by: Tom Rini <trini@ti.com>

Applied to u-boot-ti/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140418/e8fbbbdd/attachment.pgp>

[U-Boot] [U-Boot, v3, 06/10] am335x_evm: Make SPL_OS also check the boot_os variable for falcon mode

[Tom Rini]

On Fri, Mar 28, 2014 at 12:03:38PM -0400, Tom Rini wrote:

> We use the same variable as a3m071 in the environment to determine if we
> should boot into Linux or U-Boot.  This is useful on boards like
> Beaglebone Black or AM335x GP EVM where we have persistent storage for
> the environment.
> 
> Signed-off-by: Tom Rini <trini@ti.com>

Applied to u-boot-ti/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140418/e4fefd70/attachment.pgp>

[U-Boot] [U-Boot, v3, 07/10] README: Add CONFIG_SPL_OS_BOOT to README

[Tom Rini]

On Fri, Mar 28, 2014 at 12:03:39PM -0400, Tom Rini wrote:

> Signed-off-by: Tom Rini <trini@ti.com>

Applied to u-boot-ti/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140418/17cdcdd6/attachment.pgp>

[U-Boot] [U-Boot, v3, 08/10] README.falcon: Document environment variables for falcon mode

[Tom Rini]

On Fri, Mar 28, 2014 at 12:03:40PM -0400, Tom Rini wrote:

> Signed-off-by: Tom Rini <trini@ti.com>

Applied to u-boot-ti/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140418/9db8dc10/attachment.pgp>

[U-Boot] [U-Boot, v3, 09/10] a3m071: Make spl_start_uboot test like getenv_yesno does

[Tom Rini]

On Fri, Mar 28, 2014 at 12:03:41PM -0400, Tom Rini wrote:

> This change makes the behaviour slightly more rebust and will match
> other implementations which can use getenv_yesno directly.
> 
> Acked-by: Stefan Roese <sr@denx.de>
> Signed-off-by: Tom Rini <trini@ti.com>

Applied to u-boot-ti/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140418/b12a1043/attachment.pgp>

[U-Boot] [U-Boot, v3, 10/10] spl_mmc/CONFIG_SPL_OS_BOOT: Allow environment to determine what to boot

[Tom Rini]

On Fri, Mar 28, 2014 at 12:03:42PM -0400, Tom Rini wrote:

> We add two new environment variables, falcon_args_file and
> falcon_image_file, which when set will override the compiled in default
> values for falcon mode.
> 
> Signed-off-by: Tom Rini <trini@ti.com>

Applied to u-boot-ti/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140418/a04408bb/attachment.pgp>