* [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB
@ 2014-04-17 7:48 yasuhisa umano
2014-04-17 10:47 ` Marek Vasut
2014-04-17 14:07 ` Marek Vasut
0 siblings, 2 replies; 6+ messages in thread
From: yasuhisa umano @ 2014-04-17 7:48 UTC (permalink / raw)
To: u-boot
This driver is processed as two USB hub despite one.
The number of root hub is defined in R8A66597_MAX_ROOT_HUB.
This fixes that register is accessed by using the definition
of R8A66597_MAX_ROOT_HUB.
Signed-off-by: Yasuhisa Umano <yasuhisa.umano.zc@renesas.com>
---
drivers/usb/host/r8a66597-hcd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index dfe5423..c58d2a9 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -164,8 +164,8 @@ static int enable_controller(struct r8a66597 *r8a66597)
r8a66597_bset(r8a66597, INTL, SOFCFG);
r8a66597_write(r8a66597, 0, INTENB0);
- r8a66597_write(r8a66597, 0, INTENB1);
- r8a66597_write(r8a66597, 0, INTENB2);
+ for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
+ r8a66597_write(r8a66597, 0, get_intenb_reg(port));
r8a66597_bset(r8a66597, CONFIG_R8A66597_ENDIAN & BIGEND, CFIFOSEL);
r8a66597_bset(r8a66597, CONFIG_R8A66597_ENDIAN & BIGEND, D0FIFOSEL);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB
2014-04-17 7:48 [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB yasuhisa umano
@ 2014-04-17 10:47 ` Marek Vasut
2014-04-18 2:25 ` Yasuhisa Umano
2014-04-17 14:07 ` Marek Vasut
1 sibling, 1 reply; 6+ messages in thread
From: Marek Vasut @ 2014-04-17 10:47 UTC (permalink / raw)
To: u-boot
On Thursday, April 17, 2014 at 09:48:32 AM, yasuhisa umano wrote:
> This driver is processed as two USB hub despite one.
> The number of root hub is defined in R8A66597_MAX_ROOT_HUB.
> This fixes that register is accessed by using the definition
> of R8A66597_MAX_ROOT_HUB.
>
> Signed-off-by: Yasuhisa Umano <yasuhisa.umano.zc@renesas.com>
Is there any reason why those two patches were sent twice please ? They seem the
same in both cases.
Otherwise, I'm fine with those patches.
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB
2014-04-17 10:47 ` Marek Vasut
@ 2014-04-18 2:25 ` Yasuhisa Umano
0 siblings, 0 replies; 6+ messages in thread
From: Yasuhisa Umano @ 2014-04-18 2:25 UTC (permalink / raw)
To: u-boot
Hi
Sorry.
I failed to send patchs to ML by setting of MUA.
Best regards,
Yasuhisa
(2014/04/17 19:47), Marek Vasut wrote:
> On Thursday, April 17, 2014 at 09:48:32 AM, yasuhisa umano wrote:
>> This driver is processed as two USB hub despite one.
>> The number of root hub is defined in R8A66597_MAX_ROOT_HUB.
>> This fixes that register is accessed by using the definition
>> of R8A66597_MAX_ROOT_HUB.
>>
>> Signed-off-by: Yasuhisa Umano <yasuhisa.umano.zc@renesas.com>
>
> Is there any reason why those two patches were sent twice please ? They seem the
> same in both cases.
>
> Otherwise, I'm fine with those patches.
>
> Best regards,
> Marek Vasut
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB
2014-04-17 7:48 [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB yasuhisa umano
2014-04-17 10:47 ` Marek Vasut
@ 2014-04-17 14:07 ` Marek Vasut
2014-04-18 2:25 ` Yasuhisa Umano
1 sibling, 1 reply; 6+ messages in thread
From: Marek Vasut @ 2014-04-17 14:07 UTC (permalink / raw)
To: u-boot
On Thursday, April 17, 2014 at 09:48:32 AM, yasuhisa umano wrote:
> This driver is processed as two USB hub despite one.
> The number of root hub is defined in R8A66597_MAX_ROOT_HUB.
> This fixes that register is accessed by using the definition
> of R8A66597_MAX_ROOT_HUB.
>
> Signed-off-by: Yasuhisa Umano <yasuhisa.umano.zc@renesas.com>
> ---
> drivers/usb/host/r8a66597-hcd.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/host/r8a66597-hcd.c
> b/drivers/usb/host/r8a66597-hcd.c index dfe5423..c58d2a9 100644
> --- a/drivers/usb/host/r8a66597-hcd.c
> +++ b/drivers/usb/host/r8a66597-hcd.c
> @@ -164,8 +164,8 @@ static int enable_controller(struct r8a66597 *r8a66597)
>
> r8a66597_bset(r8a66597, INTL, SOFCFG);
> r8a66597_write(r8a66597, 0, INTENB0);
> - r8a66597_write(r8a66597, 0, INTENB1);
> - r8a66597_write(r8a66597, 0, INTENB2);
> + for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
> + r8a66597_write(r8a66597, 0, get_intenb_reg(port));
Hmm, looking at get_intenb_reg(), this is slightly dangerous, but I will trust
you you know what you are doing . I am a bit worried someone might set
R8A66597_MAX_ROOT_HUB to value >2 and will wonder why doesn't it work.
Anyway, I will apply this and if you feel my rant is valid, submit subsequent
patch.
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB
2014-04-17 14:07 ` Marek Vasut
@ 2014-04-18 2:25 ` Yasuhisa Umano
2014-04-18 13:57 ` Marek Vasut
0 siblings, 1 reply; 6+ messages in thread
From: Yasuhisa Umano @ 2014-04-18 2:25 UTC (permalink / raw)
To: u-boot
Hi,
Thanks for your comment.
(2014/04/17 23:07), Marek Vasut wrote:
> On Thursday, April 17, 2014 at 09:48:32 AM, yasuhisa umano wrote:
>> This driver is processed as two USB hub despite one.
>> The number of root hub is defined in R8A66597_MAX_ROOT_HUB.
>> This fixes that register is accessed by using the definition
>> of R8A66597_MAX_ROOT_HUB.
>>
>> Signed-off-by: Yasuhisa Umano <yasuhisa.umano.zc@renesas.com>
>> ---
>> drivers/usb/host/r8a66597-hcd.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/host/r8a66597-hcd.c
>> b/drivers/usb/host/r8a66597-hcd.c index dfe5423..c58d2a9 100644
>> --- a/drivers/usb/host/r8a66597-hcd.c
>> +++ b/drivers/usb/host/r8a66597-hcd.c
>> @@ -164,8 +164,8 @@ static int enable_controller(struct r8a66597 *r8a66597)
>>
>> r8a66597_bset(r8a66597, INTL, SOFCFG);
>> r8a66597_write(r8a66597, 0, INTENB0);
>> - r8a66597_write(r8a66597, 0, INTENB1);
>> - r8a66597_write(r8a66597, 0, INTENB2);
>> + for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
>> + r8a66597_write(r8a66597, 0, get_intenb_reg(port));
>
> Hmm, looking at get_intenb_reg(), this is slightly dangerous, but I will trust
> you you know what you are doing . I am a bit worried someone might set
> R8A66597_MAX_ROOT_HUB to value >2 and will wonder why doesn't it work.
I understood your point.
Certainly, current?device drivers support only the initialization of 1 or 2
interrupt for hub.
If this driver has a hub of more future, I will send the patch.
>
> Anyway, I will apply this and if you feel my rant is valid, submit subsequent
> patch.
Thank you.
>
> Best regards,
> Marek Vasut
>
Best regards,
Yasuhisa
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB
2014-04-18 2:25 ` Yasuhisa Umano
@ 2014-04-18 13:57 ` Marek Vasut
0 siblings, 0 replies; 6+ messages in thread
From: Marek Vasut @ 2014-04-18 13:57 UTC (permalink / raw)
To: u-boot
On Friday, April 18, 2014 at 04:25:41 AM, Yasuhisa Umano wrote:
> Hi,
> Thanks for your comment.
>
> (2014/04/17 23:07), Marek Vasut wrote:
> > On Thursday, April 17, 2014 at 09:48:32 AM, yasuhisa umano wrote:
> >> This driver is processed as two USB hub despite one.
> >> The number of root hub is defined in R8A66597_MAX_ROOT_HUB.
> >> This fixes that register is accessed by using the definition
> >> of R8A66597_MAX_ROOT_HUB.
> >>
> >> Signed-off-by: Yasuhisa Umano <yasuhisa.umano.zc@renesas.com>
> >> ---
> >>
> >> drivers/usb/host/r8a66597-hcd.c | 4 ++--
> >> 1 file changed, 2 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/usb/host/r8a66597-hcd.c
> >> b/drivers/usb/host/r8a66597-hcd.c index dfe5423..c58d2a9 100644
> >> --- a/drivers/usb/host/r8a66597-hcd.c
> >> +++ b/drivers/usb/host/r8a66597-hcd.c
> >> @@ -164,8 +164,8 @@ static int enable_controller(struct r8a66597
> >> *r8a66597)
> >>
> >> r8a66597_bset(r8a66597, INTL, SOFCFG);
> >> r8a66597_write(r8a66597, 0, INTENB0);
> >>
> >> - r8a66597_write(r8a66597, 0, INTENB1);
> >> - r8a66597_write(r8a66597, 0, INTENB2);
> >> + for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
> >> + r8a66597_write(r8a66597, 0, get_intenb_reg(port));
> >
> > Hmm, looking at get_intenb_reg(), this is slightly dangerous, but I will
> > trust you you know what you are doing . I am a bit worried someone might
> > set R8A66597_MAX_ROOT_HUB to value >2 and will wonder why doesn't it
> > work.
>
> I understood your point.
> Certainly, current?device drivers support only the initialization of 1 or 2
> interrupt for hub.
> If this driver has a hub of more future, I will send the patch.
Thanks
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-04-18 13:57 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-17 7:48 [U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB yasuhisa umano
2014-04-17 10:47 ` Marek Vasut
2014-04-18 2:25 ` Yasuhisa Umano
2014-04-17 14:07 ` Marek Vasut
2014-04-18 2:25 ` Yasuhisa Umano
2014-04-18 13:57 ` Marek Vasut
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox