From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Thu, 1 May 2014 12:49:06 +0200
Subject: [U-Boot] [PATCH 1/3] usb: tegra: fix PHY selection code
In-Reply-To: <1398892197-9288-1-git-send-email-swarren@wwwdotorg.org>
References: <1398892197-9288-1-git-send-email-swarren@wwwdotorg.org>
Message-ID: <201405011249.06271.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Wednesday, April 30, 2014 at 11:09:55 PM, Stephen Warren wrote:
> From: Stephen Warren <swarren@nvidia.com>
> 
> The TRM for Tegra30 and later all state that USBMODE_CM_HC must be set
> before writing to hostpc1_devlc to select which PHY to use for a USB
> controller. However, neither init_{utmi,ulpi}_usb_controller() do this
> today, so the register writes they perform for PHY selection do not
> work.
> 
> For the UTMI case, this was hacked around in commit 7e44d9320ed4 "ARM:
> Tegra: USB: EHCI: Add support for Tegra30/Tegra114" by adding code to
> ehci_hcd_init() which sets USBMODE_CM_HC and duplicates the PHY
> selection register write. This code doesn't cover the ULPI case, so I
> wouldn't be surprised if ULPI doesn't work with the current code, unless
> the ordering requirement only ends up being an issue in HW for UTMI not
> ULPI.
> 
> This patch fixes init_{utmi,ulpi}_usb_controller() to correctly set
> USBMODE_CM_HC before selecting the PHY. Now that this works, we can
> remove the duplicate UTMI-specific code in ehci_hcd_init(), thus
> simplifying that function.

This doesn't apply on u-boot-usb/master , so I cannot pick this, sorry .

Best regards,
Marek Vasut