U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Tapani Utriainen <tapani@technexion.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 05/12] MX6: add boot device support for SPL
Date: Tue, 6 May 2014 14:36:52 +0800	[thread overview]
Message-ID: <20140506143652.503a727e@triceratops> (raw)
In-Reply-To: <CAJ+vNU2fBAsSf=1vOk4HAGP5iiVVk7hW6+kEyXbe7TP4jM8cNg@mail.gmail.com>

On Mon, 5 May 2014 08:46:24 -0700
Tim Harvey <tharvey@gateworks.com> wrote:

> +cc Edward Lin
> 
> On Mon, May 5, 2014 at 2:14 AM, Stefano Babic <sbabic@denx.de> wrote:
> > Hi Tim,
> >
...
> >> --- /dev/null
> >> +++ b/arch/arm/imx-common/spl.c
> >> @@ -0,0 +1,79 @@
> >> +/*
> >> + * Copyright (C) 2014 Gateworks Corporation
> >> + * Author: Tim Harvey <tharvey@gateworks.com>
> >> + *
> >> + * SPDX-License-Identifier:     GPL-2.0+
> >> + */
> >> +
> >
> > Just a little remark. Do you have written the function on your own or
> > have you ported it from Freescale's 2009.08 ? Apart names, it looks similar.
> >
> > If this is the case, you should also add Freescale's Copyright to the
> > header.
> 
> Hi Stefano,
> 
> I've never looked at Freescales 2009.08 code myself (I have an
> aversion to vendor specific forks of u-boot almost 5 years old heh),
> but its likely bits of the function came from there originally but my
> inspiration likely came from Edward Lin's patch a while back. A
> switch/case seems the logical approach given the bitfield from the
> IMX6 reference manual with several don't-cares spread around and I
> felt that was much easier to read than trying to convert it all the
> shifts and masks.
> 
> I can add additional copyright's if anyone feels its necessary - I've
> added Edward to the cc to see if he feels its necessary.
> 
> Tim
>
> >
> >> +#include <common.h>
> >> +#include <asm/io.h>
> >> +#include <asm/arch/imx-regs.h>
> >> +#include <asm/spl.h>
> >> +#include <spl.h>
> >> +
> >> +#if defined(CONFIG_MX6)
> >> +/* determine boot device from SRC_SBMR1 register (BOOT_CFG[4:1]) */
> >> +u32 spl_boot_device(void)
> >> +{
> >> +     struct src *psrc = (struct src *)SRC_BASE_ADDR;
> >> +     unsigned reg = readl(&psrc->sbmr1);
> >> +
> >> +     /* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */
> >> +     switch ((reg & 0x000000FF) >> 4) {
> >> +      /* EIM: See 8.5.1, Table 8-9 */
> >> +     case 0x0:
> >> +             /* BOOT_CFG1[3]: NOR/OneNAND Selection */
> >> +             if ((reg & 0x00000008) >> 3)
> >> +                     return BOOT_DEVICE_ONENAND;
> >> +             else
> >> +                     return BOOT_DEVICE_NOR;
> >> +             break;
> >> +     /* SATA: See 8.5.4, Table 8-20 */
> >> +     case 0x2:
> >> +             return BOOT_DEVICE_SATA;
> >> +     /* Serial ROM: See 8.5.5.1, Table 8-22 */
> >> +     case 0x3:
> >> +             /* BOOT_CFG4[2:0] */
> >> +             switch ((reg & 0x07000000) >> 24) {
> >> +             case 0x0 ... 0x4:
> >> +                     return BOOT_DEVICE_SPI;
> >> +             case 0x5 ... 0x7:
> >> +                     return BOOT_DEVICE_I2C;
> >> +             }
> >> +             break;
> >> +     /* SD/eSD: 8.5.3, Table 8-15  */
> >> +     case 0x4:
> >> +     case 0x5:
> >> +             return BOOT_DEVICE_MMC1;
> >> +     /* MMC/eMMC: 8.5.3 */
> >> +     case 0x6:
> >> +     case 0x7:
> >> +             return BOOT_DEVICE_MMC1;
> >> +     /* NAND Flash: 8.5.2 */
> >> +     case 0x8 ... 0xf:
> >> +             return BOOT_DEVICE_NAND;
> >> +     }
> >> +     return BOOT_DEVICE_NONE;
> >> +}
> >> +#endif
> >> +
> >> +#if defined(CONFIG_SPL_MMC_SUPPORT)
> >> +/* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */
> >> +u32 spl_boot_mode(void)
> >> +{
> >> +     switch (spl_boot_device()) {
> >> +     /* for MMC return either RAW or FAT mode */
> >> +     case BOOT_DEVICE_MMC1:
> >> +     case BOOT_DEVICE_MMC2:
> >> +#ifdef CONFIG_SPL_FAT_SUPPORT
> >> +             return MMCSD_MODE_FAT;
> >> +#else
> >> +             return MMCSD_MODE_RAW;
> >> +#endif
> >> +             break;
> >> +     default:
> >> +             puts("spl: ERROR:  unsupported device\n");
> >> +             hang();
> >> +     }
> >> +}
> >> +#endif
> >>

Tim, Stefano,

that piece of code indeed originates from Freescale's 2009.08 u-boot.
(Edward has changed jobs, so the CC:d address is of no use.)

regards,

//Tapani

ps: Tim, thanks for getting the SPL framework mainlined!

  parent reply	other threads:[~2014-05-06  6:36 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-28 20:17 [U-Boot] [PATCH 00/12] MX6: SPL NAND support Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 01/12] SPL: NAND: remove CONFIG_SYS_NAND_PAGE_SIZE Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 02/12] SPL: NAND: add support for mxs nand Tim Harvey
2014-05-02 20:56   ` Scott Wood
2014-05-06  4:08     ` Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 03/12] MX6: add common SPL configuration Tim Harvey
2014-04-29  4:14   ` Eric Nelson
2014-04-29  6:37     ` Igor Grinberg
2014-04-29 11:55       ` Tim Harvey
2014-05-05  9:05   ` Stefano Babic
2014-05-07 17:01   ` Nikita Kiryanov
2014-04-28 20:17 ` [U-Boot] [PATCH 04/12] spl: consolidate arch/arm/include/asm/arch-*/spl.h Tim Harvey
2014-04-30  5:39   ` Masahiro Yamada
2014-05-05  9:08     ` Stefano Babic
2014-04-28 20:17 ` [U-Boot] [PATCH 05/12] MX6: add boot device support for SPL Tim Harvey
2014-04-29  4:28   ` Eric Nelson
2014-05-05  9:14   ` Stefano Babic
2014-05-05 15:46     ` Tim Harvey
2014-05-05 18:30       ` Stefano Babic
2014-05-06  6:36       ` Tapani Utriainen [this message]
2014-05-06  7:55         ` Stefano Babic
2014-05-06 15:42           ` Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 06/12] IMX: add comments and remove unused struct fields Tim Harvey
2014-05-05 10:28   ` Stefano Babic
2014-04-28 20:17 ` [U-Boot] [PATCH 07/12] MX6: add structs for mmdc and ddr iomux registers Tim Harvey
2014-04-29 14:20   ` Eric Nelson
2014-05-05 10:34   ` Stefano Babic
2014-05-05 15:52     ` Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 08/12] MX6: add mmdc configuration for MX6Q/MX6DL Tim Harvey
2014-04-29 15:15   ` Eric Nelson
2014-04-29 18:19     ` Tim Harvey
2014-04-29 18:26       ` Eric Nelson
2014-04-29 18:35     ` Otavio Salvador
2014-04-28 20:17 ` [U-Boot] [PATCH 09/12] IMX: add additional function for pinmux using an array Tim Harvey
2014-04-29 15:22   ` Eric Nelson
2014-05-06  4:35     ` Tim Harvey
2014-05-07 16:59       ` Nikita Kiryanov
2014-05-08  4:11         ` Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 10/12] imx: ventana: split read_eeprom into standalone file Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 11/12] imx: ventana: auto-configure for IMX6Q vs IMX6DL Tim Harvey
2014-04-28 20:17 ` [U-Boot] [PATCH 12/12] imx: ventana: switch to SPL Tim Harvey
2014-05-06 18:18   ` Tim Harvey
2014-05-06 18:45     ` York Sun
2014-05-06 19:11     ` Jeroen Hofstee
2014-05-06 23:35       ` Tim Harvey
2014-05-07 16:14         ` York Sun
2014-05-07 18:43           ` Jeroen Hofstee
2014-05-07 20:27           ` Tim Harvey
2014-05-07 20:29             ` York Sun
2014-05-07 20:35               ` Tim Harvey
2014-05-07 20:36                 ` York Sun
2014-05-07  9:29     ` Stefano Babic
2014-05-14  4:58       ` Tim Harvey
2014-05-14  5:03         ` Tim Harvey
2014-05-14 22:32           ` Tim Harvey
2014-05-15  9:20             ` Stefano Babic

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140506143652.503a727e@triceratops \
    --to=tapani@technexion.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox