From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Wed, 7 May 2014 08:40:58 -0400 Subject: [U-Boot] [PATCH 8/8] [omap3][overo] Allow overo to boot with device tree In-Reply-To: References: <1398813328-17365-1-git-send-email-ashcharles@gmail.com> <1398813328-17365-9-git-send-email-ashcharles@gmail.com> <20140506181414.GX22182@bill-the-cat> Message-ID: <20140507124058.GF22182@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, May 06, 2014 at 04:56:08PM -0700, Ash Charles wrote: > On Tue, May 6, 2014 at 11:14 AM, Tom Rini wrote: > > Please see DEFAULT_LINUX_BOOT_ENV and the related discussions. If you > > have less than 128MB DDR we can sort something out, but if you have > > 256MB it's really advised to use 0x88000000 for the DT (see > > Documentation/arm/Booting in the kernel). > Overo doesn't pull in the configuration from > include/configs/ti_armv7_common.h where DEFAULT_LINUX_BOOT_ENV is > defined. Might a v2 using the settings defined by > DEFAULT_LINUX_BOOT_ENV in the overo config be acceptable? I'd like to start by seeing if we can adopt the files (ti_omap3_common.h which grabs ti_armv7_common.h). The intention is to have the really common parts there and the board specific elsewhere. It's indeed not quite perfect and we probably need to push a few things back up to the board, even if they're repeated frequently. -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: