From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Booting armv8 kernel on uboot
Date: Thu, 22 May 2014 12:36:20 -0400 [thread overview]
Message-ID: <20140522163620.GH1752@bill-the-cat> (raw)
In-Reply-To: <F067C664-AC41-4652-8A88-D5992DE266B8@phytium.com.cn>
On Thu, May 22, 2014 at 10:26:17PM +0800, fenghua at phytium.com.cn wrote:
>
>
> > Hi ,
> > I have added mmc driver into the vexpress64 board file for uboot and tested
> > it on FVP base model. I tried booting a kernel on that but it is aborting
> > with the following message:
> > Final value for argc=3
> > Loading Kernel Image ... OK
> > kernel loaded at 0x00080000, end = 0x00827024
> > using: FDT
> > reserving fdt memory region: addr=80000000 size=10000
> > ## initrd_high = 0xffffffffffffffff, copy_to_ram = 1
> > ramdisk load start = 0x00000000, ramdisk load end = 0x00000000
> > ## device tree at 0000000090008000 ... 000000009000a850 (len=22609 [0x5851])
> > Loading Device Tree to 000000009fffa000, end 000000009ffff850 ... OK
> > Initial value for argc=3
> > Final value for argc=3
> > ## Transferring control to Linux (at address 80000)...
> > Starting kernel ...
> >
> > "Synchronous Abort" handler, esr 0x02000000
> > ELR: 80000
> > LR: fff90fc8
> > x0 : 000000009fffa000 x1 : 000000001c090000
> > x2 : 000000001c090000 x3 : 0000000000000020
> > x4 : 00000000fff6b834 x5 : 0000000000000000
> > x6 : 00000000fff6bb40 x7 : 00000000ffffffd0
> > x8 : 000000000000000f x9 : 000000007ff8e000
> > x10: 00000000fffb7188 x11: 0000000000000000
> > x12: 0000000000006000 x13: 0000000000000004
> > x14: 0000000000000003 x15: 00000000fffc7c20
> > x16: 0000000000000000 x17: 0000000000000000
> > x18: 00000000fff6beb8 x19: 0000000000080000
> > x20: 00000000fffc7a70 x21: 0000000000000000
> > x22: 0000000000000000 x23: 00000000fff6d8d8
> > x24: 0000000000000000 x25: 00000000fffc2630
> > x26: 0000000000000000 x27: 0000000080008000
> > x28: 0000000000000000 x29: 00000000fff6bb40
> >
> > Can anyone please provide the procedure on how to boot the kernel with
> > u-boot on armv8 models ?
> I always use mkimage converting kernel to uImage and booting it. It works fine.
> Wish this help you.
Which version of the model are you using and which kernel tree? Thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140522/8a8595a6/attachment.pgp>
next prev parent reply other threads:[~2014-05-22 16:36 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-21 8:46 [U-Boot] Booting armv8 kernel on uboot Vishal Bhoj
2014-05-21 9:40 ` Mark Rutland
2014-05-21 15:28 ` Tom Rini
2014-05-21 15:34 ` Mark Rutland
2014-05-22 5:48 ` Vishal Bhoj
2014-05-22 12:39 ` Tom Rini
2014-05-22 13:07 ` Vishal Bhoj
2014-05-22 14:26 ` fenghua at phytium.com.cn
2014-05-22 16:36 ` Tom Rini [this message]
2014-05-22 16:55 ` Vishal Bhoj
2014-05-26 13:45 ` fenghua at phytium.com.cn
2014-05-27 13:56 ` fenghua at phytium.com.cn
2014-05-28 4:44 ` TigerLiu at via-alliance.com
2014-05-29 13:00 ` fenghua at phytium.com.cn
2014-06-04 4:31 ` Vishal Bhoj
2014-06-04 9:35 ` Sudeep Holla
2014-05-23 5:38 ` TigerLiu at via-alliance.com
-- strict thread matches above, loose matches on Subject: below --
2016-07-20 11:28 [U-Boot] Booting armv8 Kernel on UBoot Rajkumar Ramasamy
2016-07-21 4:11 Rajkumar Ramasamy
2016-07-21 5:14 Rajkumar Ramasamy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140522163620.GH1752@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox