From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] pxa310 SDHC support.
Date: Mon, 26 May 2014 12:56:34 +0200 [thread overview]
Message-ID: <201405261256.34348.marex@denx.de> (raw)
In-Reply-To: <53831761.4070208@163.com>
On Monday, May 26, 2014 at 12:28:49 PM, aking_jin wrote:
> Hi, Marek
>
> On 2014/5/26 Mon 16:59, Marek Vasut wrote:
> > On Monday, May 26, 2014 at 09:51:58 AM, aking_jin wrote:
> >> Hi, marek
> >>
> >> I've seen on the Internet that pxa310 support SDHC up to 32GB, but
> >>
> >> I'm using u-boot 2014.01, It could initialize OK.
> >>
> >> Device: PXA MMC
> >> Manufacturer ID: 3
> >> OEM: 5344
> >> Name: SS08G
> >> Tran Speed: 26000000
> >> Rd Block Len: 512
> >> SD version 3.0
> >> High Capacity: Yes
> >> Capacity: 7.4 GiB
> >> Bus Width: 4-bit
> >>
> >> It shows time out while reading block . Is there any particular
> >>
> >> process should be add?
> >
> > It is well possible that the driver is broken on PXA3xx . Note that
> > mainline U- Boot doesn't really support PXA3xx . Are you working on
> > PXA3xx support for mainline U-Boot ?
>
> I'm looking for support for pxa310 MMC SDHC .
> In the PXA310 SPEC:
>
> The MMC module is based on the standards outlined in the
> MultiMediaCard System
> Specification Version 3.3.1. The SD module manages one SD or SDIO card
> based on the standards
> outlined in the SD Memory Card Specification Version 1.10 and SDIO Card
> Specification Version
> 1.0
>
> I'm doubting if the controller support SDHC (SD 2.0) ?
The PXA27x controller works even with SDXC , that is tested. I suspect there
might be some change in the PXA3xx controller, but I don't really know for sure.
You'd have to check.
Also, you didn't really answer my question with regards to porting U-Boot above.
If you do that, use latest mainline, not 2014.01 .
Best regards,
Marek Vasut
next prev parent reply other threads:[~2014-05-26 10:56 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-26 7:51 [U-Boot] pxa310 SDHC support aking_jin
2014-05-26 8:59 ` Marek Vasut
2014-05-26 10:17 ` aking_jin
2014-05-26 10:28 ` aking_jin
2014-05-26 10:56 ` Marek Vasut [this message]
2014-05-26 11:48 ` aking
2014-05-26 12:10 ` Marek Vasut
2014-05-26 13:55 ` aking
2014-05-26 14:15 ` Marek Vasut
2014-05-27 0:53 ` aking_jin
2014-05-27 9:20 ` Marek Vasut
2014-06-13 9:13 ` aking_jin
2014-06-13 10:32 ` Marek Vasut
2014-05-26 11:54 ` aking
2014-05-26 12:56 ` Marek Vasut
-- strict thread matches above, loose matches on Subject: below --
2014-05-26 8:05 aking_jin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201405261256.34348.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox