From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Mon, 26 May 2014 16:15:55 +0200
Subject: [U-Boot] pxa310 SDHC support.
In-Reply-To: <538347EE.6010707@163.com>
References: <5382F29E.8000105@163.com> <201405261410.24097.marex@denx.de>
	<538347EE.6010707@163.com>
Message-ID: <201405261615.55356.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Monday, May 26, 2014 at 03:55:58 PM, aking wrote:

[...]

> >>> The PXA27x controller works even with SDXC , that is tested. I suspect
> >>> there might be some change in the PXA3xx controller, but I don't really
> >>> know for sure. You'd have to check.
> >> 
> >> Thank you for your answer.  are you using SD mode or SPI Mode? which
> >> version are you using?
> > 
> > I believe the pxa_mmc_gen.c is what needs to be used. There is no other
> > PXA MMC driver in U-Boot mainline. I now noticed it has some basic
> > monahans (pxa3xx) support too.
> 
>          Could you give out a log with MACRO CONFIG_MMC_TRACE on your
> pxa27x device ? any initialize ,read ,write, erase operation?
>      Sorry for disturb you.

No, I cannot, sorry. I don't have the PXA27x device handy.

+CC panto, he might have an idea how to debug it.

Best regards,
Marek Vasut