From mboxrd@z Thu Jan 1 00:00:00 1970 From: Masahiro Yamada Date: Thu, 05 Jun 2014 17:59:10 +0900 Subject: [U-Boot] Zynq bug and fix by generic board In-Reply-To: References: Message-ID: <20140605175910.9581.AA925319@jp.panasonic.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Albert and Michal, On Wed, 4 Jun 2014 12:54:23 +0200 Michal Simek wrote: > Hi Albert and Masahiro, > > surprisingly I have tested zynq in Tom's repo and > I am getting stuck in full u-boot. > I have also tried SPL with MMC and it is hanging in the same location > > U-Boot SPL 2014.07-rc2-00063-g3fe1a8545b55 (Jun 04 2014 - 11:57:12) > mmc boot > reading system.dtb > spl_load_image_fat_os: error reading image system.dtb, err - -1 > reading u-boot-dtb.img > reading u-boot-dtb.img > > > U-Boot 2014.07-rc2-00063-g3fe1a8545b55 (Jun 04 2014 - 11:57:12) > > I2C: ready > Memory: ECC disabled > DRAM: 1 GiB > > Problem is with relocation and it is not related to OF_CONTROL. > > I have added 3 pending patches on the top of current master next > and "ARM: zynq: Enable generic board for Xilinx Zynq" fix the problem. > That's why I think that is easier for just apply it to mainline repo > because we need to apply this patch anyway. > > Masahiro: Can you please check if the latest u-boot is working for you? > Albert: If Masahiro confirms the same issue, can I send you one more pull > request with these 3 fixes? (I have also run buildman on them too) > (Enabling generic board, Fix message which is caused by enabling generic board, > + one fix from Masahiro regarding compilation out of tree files for SPL). I found how to fix the problem. Add one line to arch/arm/cpu/armv7/zynq/u-boot.lds as follows: --- a/arch/arm/cpu/armv7/zynq/u-boot.lds +++ b/arch/arm/cpu/armv7/zynq/u-boot.lds @@ -18,6 +18,7 @@ SECTIONS .text : { *(.__image_copy_start) + *(.vectors) CPUDIR/start.o (.text*) *(.text*) } It worked on my ZC706 board. Best Regards Masahiro Yamada