[U-Boot] [PATCH 1/6] usb: ehci: mx6: Add support for i.MX6SL

[Marek Vasut <marex@denx.de>]

On Monday, June 16, 2014 at 02:46:48 AM, Otavio Salvador wrote:
> The i.MX6SL has a different base address for the controller. This
> patch adapts the driver to support the different base address for this
> case.
> 
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---
> 
>  drivers/usb/host/ehci-mx6.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
> index c0a557b..5ba1c5e 100644
> --- a/drivers/usb/host/ehci-mx6.c
> +++ b/drivers/usb/host/ehci-mx6.c
> @@ -53,6 +53,12 @@
>  #define UCMD_RUN_STOP           (1 << 0) /* controller run/stop */
>  #define UCMD_RESET		(1 << 1) /* controller reset */
> 
> +#ifdef CONFIG_MX6SL
> +#define USB_BASE_ADDR		USBO2H_USB_BASE_ADDR
> +#else
> +#define USB_BASE_ADDR		USBOH3_USB_BASE_ADDR
> +#endif

Can the CPU type be detected at runtime so we don't need this ugly ifdef ?

Best regards,
Marek Vasut