[U-Boot] [PATCH 4/6] mmc: fsl_esdhc: Add support to force VSELECT set

[Marek Vasut <marex@denx.de>]

On Monday, June 16, 2014 at 02:46:51 AM, Otavio Salvador wrote:
> There are board were

Please fix your English and send a patch, thanks :)

> we cannot do voltage negotiation but want to set
> the VSELECT bit forcely to ensure it to work at 1.8V.
> 
> This commit adds CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT flag for this use.
> 
> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
> ---
> 
>  drivers/mmc/fsl_esdhc.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index c75b38f..b3870e2 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -517,6 +517,10 @@ static int esdhc_init(struct mmc *mmc)
>  	/* Set timout to the maximum value */
>  	esdhc_clrsetbits32(&regs->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16);
> 
> +#ifdef CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
> +	esdhc_setbits32(&regs->vendorspec, ESDHC_VENDORSPEC_VSELECT);
> +#endif

Documentation is missing.

Best regards,
Marek Vasut