[U-Boot] [PATCH] usb: ehci: rmobile: Add support R8A7794

[Marek Vasut <marex@denx.de>]

On Thursday, July 24, 2014 at 07:52:07 AM, Nobuhiro Iwamatsu wrote:
> R8A7794 has same IP of USB controller as R8A7790 and R8A7791.
> This addes support for R8A7794.
> 
> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
> ---
>  drivers/usb/host/ehci-rmobile.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/usb/host/ehci-rmobile.c
> b/drivers/usb/host/ehci-rmobile.c index 049e4c4..29b4a93 100644
> --- a/drivers/usb/host/ehci-rmobile.c
> +++ b/drivers/usb/host/ehci-rmobile.c
> @@ -29,6 +29,12 @@ static u32
> usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { 0xEE0C0000,	/* USB1
> */
>  	0xEE000000	/* USB3 (USB3.0 Host)*/

Just a side-note ... Will this one USB3 controller above really work with the 
EHCI driver ? I know there is a compat mode for xHCI, but I'm not quite sure 
it's this easy to make it operational.

>  };
> +#elif defined(CONFIG_R8A7794)
> +static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = {
> +	0xEE080000,	/* USB0 (EHCI) */
> +	0xEE0C0000,	/* USB1 */
> +	/* R8A7794 does not have USB 3.0. */
> +};
>  #else
>  #error rmobile EHCI USB driver not supported on this platform
>  #endif

Applied, thanks.

Best regards,
Marek Vasut