From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Thu, 24 Jul 2014 23:38:16 +0200 Subject: [U-Boot] [PATCH] usb: ehci: rmobile: Add support R8A7794 In-Reply-To: <1406181127-27884-1-git-send-email-nobuhiro.iwamatsu.yj@renesas.com> References: <1406181127-27884-1-git-send-email-nobuhiro.iwamatsu.yj@renesas.com> Message-ID: <201407242338.16715.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thursday, July 24, 2014 at 07:52:07 AM, Nobuhiro Iwamatsu wrote: > R8A7794 has same IP of USB controller as R8A7790 and R8A7791. > This addes support for R8A7794. > > Signed-off-by: Nobuhiro Iwamatsu > --- > drivers/usb/host/ehci-rmobile.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/usb/host/ehci-rmobile.c > b/drivers/usb/host/ehci-rmobile.c index 049e4c4..29b4a93 100644 > --- a/drivers/usb/host/ehci-rmobile.c > +++ b/drivers/usb/host/ehci-rmobile.c > @@ -29,6 +29,12 @@ static u32 > usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { 0xEE0C0000, /* USB1 > */ > 0xEE000000 /* USB3 (USB3.0 Host)*/ Just a side-note ... Will this one USB3 controller above really work with the EHCI driver ? I know there is a compat mode for xHCI, but I'm not quite sure it's this easy to make it operational. > }; > +#elif defined(CONFIG_R8A7794) > +static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { > + 0xEE080000, /* USB0 (EHCI) */ > + 0xEE0C0000, /* USB1 */ > + /* R8A7794 does not have USB 3.0. */ > +}; > #else > #error rmobile EHCI USB driver not supported on this platform > #endif Applied, thanks. Best regards, Marek Vasut