[U-Boot] [PATCH 03/12] mtd: nand: s3c: Fix data type width in debug()

[Marek Vasut <marex@denx.de>]

On Tuesday, July 29, 2014 at 03:22:29 AM, Scott Wood wrote:
> On Tue, 2014-07-29 at 03:11 +0200, Marek Vasut wrote:
> > On Tuesday, July 29, 2014 at 02:12:47 AM, Scott Wood wrote:
> > > On Tue, 2014-07-29 at 02:09 +0200, Marek Vasut wrote:
> > > > On Tuesday, July 29, 2014 at 01:35:57 AM, Scott Wood wrote:
> > > > > On Tue, 2014-07-22 at 02:34 +0200, Marek Vasut wrote:
> > > > > > Printing u32 with %02x is just a bad idea, fix it.
> > > > > 
> > > > > Why is it "just a bad idea" if the values aren't expected to exceed
> > > > > 0xff?
> > > > 
> > > > NAND_CMD_DEPLETE1 is 0x100 for example. I doubt anyone will use AND
> > > > with this controller, but I'd be much happier to see the print
> > > > properly matching the variable we're printing.
> > > 
> > > It will match it.  %02x doesn't restrict the output to two characters;
> > > it just makes sure there are at least two characters.
> > 
> > The output with %02x in this case is 0xffffffXY , so there is something
> > really wrong going on. With %08x, the output is as expected (because
> > that does match ths size of the variable).
> 
> Is that for NAND_CMD_NONE which is -1?  Or something else?

OK, now it makes sense.

> Also regarding the changelog, neither of these values are declared as
> u32.

They're int and unsigned int, which on ARMv7 and lower (this is armv4) is 32bit 
with GCC.

Best regards,
Marek Vasut