From: Lukasz Majewski <l.majewski@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [UBOOT RFC PATCH 02/13] usb: gadget: udc-core: Add minimal udc-core from linux kernel
Date: Tue, 19 Aug 2014 17:38:42 +0200 [thread overview]
Message-ID: <20140819173842.1635c769@amdc2363> (raw)
In-Reply-To: <20140819152808.GJ16085@saruman.home>
Hi Felipe, Kishon
> On Tue, Aug 19, 2014 at 08:48:36PM +0530, Kishon Vijay Abraham I
> wrote:
> > Hi Lukasz,
> >
> > On Tuesday 19 August 2014 02:22 PM, Lukasz Majewski wrote:
> > > Hi Kishon,
> > >
> > >> In order to support multiple USB device controllers in uboot,
> > >> udc-core is needed.
> > >
> > > Is it? In u-boot at best only one UDC is operational at a time.
> >
> > I didn't mean operational at the same time. dra7xx has 4 USB
> > controllers and we should allow the user to use any USB port for
> > DFU.
>
> but from u-boot's perspective, that can (should?) be a build-time
> choice. That user, certainly, won't need more than one port active for
> booting, right ?
This is my point. We are working with the bootloader. Some things here
are set at board configuration and aren't changed afterwards (like
only UDC 0 output is wired out).
The dfu/ums commands give you the ability to specify controller if
you need such option.
>
> > >> udc-core also helps to cleanly link the USB
> > >> peripheral driver with the gadget driver. Hence Ported minimal
> > >> udc-core from linux kernel.
> > >
> > > I'd appreciate the exact SHA for this udc-core.c code. And the SHA
> > > should be from some already released mainline code (like final
> > > 3.16), not any private branch nor linux-next.
> >
> > We can't have the exact udc-core.c from linux kernel as it deals
> > with kernel driver model stuff and vfs which is not needed for
> > kernel. Trying to have the exact same code from kernel complicates
> > it.
>
> what he means is to point to the SHA1 when you originally forked the
> code from kernel. Sure udc-core can't be the same, but you based off
> of a known commit ID frmo the kernel.
>
+1
The best way is to grab original source from mailine kernel, and then
provide patch which adjust it. In this way we have clean trace from
where the code comes.
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
next prev parent reply other threads:[~2014-08-19 15:38 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-18 14:28 [U-Boot] [UBOOT RFC PATCH 00/13] DRA7xx: Add DWC3 USB driver and enable DFU Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 01/13] include: linux: preparation for porting dwc3 from linux kernel Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 02/13] usb: gadget: udc-core: Add minimal udc-core " Kishon Vijay Abraham I
2014-08-18 14:36 ` Felipe Balbi
2014-08-19 14:58 ` Kishon Vijay Abraham I
2014-08-19 8:52 ` Lukasz Majewski
2014-08-19 15:11 ` Felipe Balbi
2014-08-19 15:18 ` Kishon Vijay Abraham I
2014-08-19 15:28 ` Felipe Balbi
2014-08-19 15:38 ` Lukasz Majewski [this message]
2014-08-19 16:06 ` Kishon Vijay Abraham I
2014-08-20 7:02 ` Lukasz Majewski
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 03/13] ARM: DRA7: Enable clocks for USB OTGSS and USB PHY Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 04/13] usb: dwc3: Add dwc3 driver Kishon Vijay Abraham I
2014-08-18 14:37 ` Felipe Balbi
2014-08-19 15:19 ` Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 05/13] usb: dwc3-omap: Add dwc3 glue driver for OMAP Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 06/13] usb: dwc3: TI PHY: PHY driver for dwc3 in TI platforms Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor Kishon Vijay Abraham I
2014-08-18 14:38 ` Felipe Balbi
2014-08-18 14:49 ` Lukasz Majewski
2014-08-18 14:56 ` Lukasz Majewski
2014-08-19 15:38 ` Kishon Vijay Abraham I
2014-08-19 15:44 ` Felipe Balbi
2014-08-20 7:34 ` Lukasz Majewski
2014-08-20 16:11 ` Felipe Balbi
2014-08-21 8:00 ` Lukasz Majewski
2014-08-21 13:50 ` Felipe Balbi
2014-08-20 7:23 ` Lukasz Majewski
2014-08-19 15:34 ` Kishon Vijay Abraham I
2014-08-19 15:39 ` Felipe Balbi
2014-08-19 15:42 ` Kishon Vijay Abraham I
2014-08-19 15:48 ` Felipe Balbi
2014-08-19 15:53 ` Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 08/13] common: cmd_dfu: invoke board_usb_cleanup() for cleaning up Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 09/13] common: cmd_dfu: add an API that takes controller index for handling interrupts Kishon Vijay Abraham I
2014-08-19 8:53 ` Lukasz Majewski
2014-08-19 16:09 ` Kishon Vijay Abraham I
2014-08-20 7:37 ` Lukasz Majewski
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 10/13] board: ti: DRA7: added USB initializtion code Kishon Vijay Abraham I
2014-08-18 14:40 ` Felipe Balbi
2014-08-19 16:13 ` Kishon Vijay Abraham I
2014-08-19 16:26 ` Felipe Balbi
2014-08-22 10:47 ` Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 11/13] commom: usb: implement "__weak" functions to make compiler happy Kishon Vijay Abraham I
2014-08-19 8:28 ` Lukasz Majewski
2014-08-19 16:14 ` Kishon Vijay Abraham I
2014-08-21 17:32 ` Tom Rini
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 12/13] include: configs: Enable DWC3 and DFU in DRA7xx Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 13/13] dwc3: core: Change the bounce buffer size to 4096 Kishon Vijay Abraham I
2014-08-18 14:41 ` Felipe Balbi
2014-08-19 16:15 ` Kishon Vijay Abraham I
2014-08-19 16:27 ` Felipe Balbi
2014-08-22 11:02 ` Kishon Vijay Abraham I
2014-08-22 13:54 ` Felipe Balbi
2014-08-18 15:29 ` [U-Boot] [UBOOT RFC PATCH 00/13] DRA7xx: Add DWC3 USB driver and enable DFU Tom Rini
2014-08-19 8:56 ` Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140819173842.1635c769@amdc2363 \
--to=l.majewski@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox