From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Sat, 30 Aug 2014 00:29:09 +0200
Subject: [U-Boot] [PATCH v3 3/3] mx6sxsabresd: Add PCI support
In-Reply-To: <CAOMZO5A0bWE9pCYQQM=NMug6JCnBFkzorYScBvZr-twHgMmcPQ@mail.gmail.com>
References: <1408987606-18034-1-git-send-email-fabio.estevam@freescale.com>
	<CAOMZO5A0Rjp446VSP7MPnUavEVUwzbLo59UOYXDVocp5f-5PaQ@mail.gmail.com>
	<CAOMZO5A0bWE9pCYQQM=NMug6JCnBFkzorYScBvZr-twHgMmcPQ@mail.gmail.com>
Message-ID: <201408300029.09414.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Friday, August 29, 2014 at 10:19:11 PM, Fabio Estevam wrote:
> Hi Stefano,
> 
> On Mon, Aug 25, 2014 at 5:11 PM, Fabio Estevam <festevam@gmail.com> wrote:
> > On Mon, Aug 25, 2014 at 4:50 PM, Marek Vasut <marex@denx.de> wrote:
> >> On Monday, August 25, 2014 at 07:26:46 PM, Fabio Estevam wrote:
> >>> Tested with an Intel Wireless PCI 7260HMW card:
> >>> 
> >>> U-Boot 2014.10-rc1-16576-g4a8a8a8-dirty (Aug 23 2014 - 16:05:11)
> >>> 
> >>> CPU:   Freescale i.MX6SX rev1.0 at 792 MHz
> >>> Reset cause: WDOG
> >>> Board: MX6SX SABRE SDB
> >>> I2C:   ready
> >>> DRAM:  1 GiB
> >>> MMC:   FSL_SDHC: 0
> >>> 
> >>>   00:01.0     - 16c3:abcd - Bridge device
> >>>   
> >>>    01:00.0    - 8086:08b1 - Network controller
> >>> 
> >>> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> >> 
> >> Should this output be really part of the commit message?
> > 
> > Personally I don't see any problem with it, but if Stefano prefers I
> > can remove it and send a v4.
> 
> Please let me know if you want me to resend this series or if you are
> fine with it.

A proper commit message describing the change would be very useful. Thank you!

Best regards,
Marek Vasut