From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 00/51] arm: socfpga: Usability fixes
Date: Wed, 1 Oct 2014 13:13:15 +0200 [thread overview]
Message-ID: <201410011313.15526.marex@denx.de> (raw)
In-Reply-To: <1412144338.7595.6.camel@clsee-VirtualBox.altera.com>
On Wednesday, October 01, 2014 at 08:18:58 AM, Chin Liang See wrote:
> On Sun, 2014-09-21 at 14:58 +0200, marex at denx.de wrote:
> > This entire series is the second stab at making SoCFPGA usable with
> > mainline U-Boot again. There are much fewer bits missing than in the
> > last series, more cleanup happened and bugs were fixed. This allows
> > me to use mainline U-Boot on my SoCFPGA systems.
> >
> > The big missing part is the SPL generation, which still needs a lot
> > of additional work. We also miss the Cadence QSPI controller driver.
> >
> > This set contains patches for a few subsystems, which are utilized
> > by the SoCFPGA, but the most part is the SoCFPGA chip support. This
> > series now contains cleanup for the mayhem in drivers/fpga/altera.c
> > code, which was terrible, but is now much better.
>
> Thanks Marek, I tested this series of patches and here are the outcome I
> have.
>
> SDMMC - Working as I can read and write to SDMMC
> Boot - Working as I can boot till Linux
> Ethernet - Seems not working for me.
I suspect that's because the ethernet support in the originally upstreamed
SoCFPGA code never worked on the SoCDK in the first place. I think the SoCDK
uses EMAC1, but the mainline code uses EMAC0 for whatever reason.
Edit include/configs/socfpga_cyclone5.h and change:
-#define CONFIG_EMAC_BASE SOCFPGA_EMAC0_ADDRESS
+#define CONFIG_EMAC_BASE SOCFPGA_EMAC1_ADDRESS
Does this work ?
> FPGA programming - Seems not working for me too.
I zap'd the "run bridge_enable_handoff" thing and replaced it with "bridge
enable" command. Could that be the case ?
> I will help to look into those features which are not working for me.
> But this series of patches serves as a good start.
Please let me know if some of the above help first. The network part should and
if it does, then I will add a patch. The FPGA part should as well
Also, I separated the patches into smaller groups, which I will resubmit one
more time, but you can find a merge of all of them at [1], so you don't have
to apply them by hand. Please be advised, that those branches will be replaced
with a never ones, that's why there's the timestamp at the end of the name (so
check the repository if there is no new topic/arm/socfpga-yyyymmdd). Also, I
will likely garbage collect the old ones at some point.
[1] http://git.denx.de/?p=u-boot/u-boot-
socfpga.git;a=shortlog;h=refs/heads/topic/arm/socfpga-20140930
Best regards,
Marek Vasut
prev parent reply other threads:[~2014-10-01 11:13 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-21 12:58 [U-Boot] [PATCH 00/51] arm: socfpga: Usability fixes Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH V2 01/51] net: Remove unused CONFIG_DW_SEARCH_PHY from configs Marek Vasut
2014-10-01 6:50 ` Chin Liang See
2014-09-21 12:58 ` [U-Boot] [PATCH 02/51] net: phy: Cleanup drivers/net/phy/micrel.c Marek Vasut
2014-10-01 6:57 ` Chin Liang See
2014-09-21 12:58 ` [U-Boot] [PATCH 03/51] net: dwc: Fix cache alignment issues Marek Vasut
2014-10-01 7:23 ` Chin Liang See
2014-10-01 11:21 ` Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 04/51] net: dwc: Make the cache handling less cryptic Marek Vasut
2014-10-01 7:35 ` Chin Liang See
2014-09-21 12:58 ` [U-Boot] [PATCH 05/51] mmc: dw_mmc: cleanups Marek Vasut
2014-10-01 7:40 ` Chin Liang See
2014-09-21 12:58 ` [U-Boot] [PATCH 06/51] mmc: dw_mmc: Fix cache alignment issue Marek Vasut
2014-10-01 9:45 ` Chin Liang See
2014-10-01 11:30 ` Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 07/51] tools: socfpga: Add socfpga preloader signing to mkimage Marek Vasut
2014-10-01 10:10 ` Chin Liang See
2014-10-01 11:51 ` Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 08/51] arm: socfpga: Complete the list of base addresses Marek Vasut
2014-10-01 10:19 ` Chin Liang See
2014-10-01 11:54 ` Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 09/51] arm: socfpga: Clean up base address file Marek Vasut
2014-10-01 10:30 ` Chin Liang See
2014-09-21 12:58 ` [U-Boot] [PATCH V2 10/51] arm: socfpga: Add watchdog disable for socfpga Marek Vasut
2014-10-01 10:50 ` Chin Liang See
2014-10-01 12:07 ` Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 11/51] arm: socfpga: sysmgr: Clean up system manager Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 12/51] arm: socfpga: clock: Implant order into bit definitions Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 13/51] arm: socfpga: clock: Drop nonsense inlining from clock manager code Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 14/51] arm: socfpga: clock: Add missing stubs into board file Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH V2 15/51] arm: socfpga: clock: Add code to read clock configuration Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 16/51] arm: socfpga: clock: Trim down code duplication Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 17/51] arm: socfpga: clock: Clean up bit definitions Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 18/51] arm: socfpga: clock: Sync with reference code Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 19/51] arm: socfpga: mmc: Pick the clock from clock manager Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 20/51] arm: socfpga: timer: Pull the timer reload value from config file Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 21/51] arm: socfpga: reset: Add EMAC reset functions Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 22/51] arm: socfpga: misc: Add proper ethernet initialization Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 23/51] arm: socfpga: misc: Add SD controller init Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 24/51] arm: socfpga: misc: Align print_cpuinfo() output Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 25/51] arm: socfpga: board: Correctly set ATAG position Marek Vasut
2014-09-21 12:58 ` [U-Boot] [PATCH 26/51] arm: socfpga: board: Align checkboard() output Marek Vasut
2014-09-21 13:11 ` [U-Boot] [PATCH 27/51] fpga: altera: Clean up the printing and debug Marek Vasut
2014-09-24 12:46 ` Michal Simek
2014-09-24 13:22 ` Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 28/51] fpga: altera: Clean up altera_validate function Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 29/51] fpga: altera: More indentation trimdown Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 30/51] fpga: altera: Move altera_validate to the top Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 31/51] fpga: altera: Make altera_validate return normal values Marek Vasut
2014-09-22 9:16 ` Pavel Machek
2014-09-22 9:36 ` Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 32/51] fpga: altera: Clean up enums in altera.h Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 33/51] fpga: altera: Turn the switches into table lookup Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH V2 34/51] arm: socfpga: fpga: Add SoCFPGA FPGA programming interface Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 35/51] arm: socfpga: reset: Add function to reset FPGA bridges Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 36/51] arm: socfpga: sysmgr: Add FPGA bits into system manager Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 37/51] arm: cache: Add support for write-allocate D-Cache Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 38/51] arm: socfpga: cache: Define cacheline size Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 39/51] arm: socfpga: cache: Enable D-Cache Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 40/51] arm: socfpga: cache: Enable PL310 L2 cache Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 41/51] arm: socfpga: scu: Add SCU register file Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 42/51] arm: socfpga: nic301: Add NIC-301 GPV " Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 43/51] arm: socfpga: pl310: Map SDRAM to 0x0 Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 44/51] arm: socfpga: nic301: Add NIC-301 configuration code Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 45/51] arm: socfpga: Enable DWMMC for SOCFPGA Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 46/51] arm: socfpga: Enable SDMMC boot for SOCFPGA U-Boot Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 47/51] arm: socfpga: Move cache_enable to CPU code Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 48/51] arm: socfpga: Add command to control HPS-FPGA bridges Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 49/51] arm: socfpga: Clean up SoCFPGA configuration Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 50/51] arm: socfpga: Split " Marek Vasut
2014-09-24 14:10 ` Dinh Nguyen
2014-09-24 15:38 ` Pavel Machek
2014-09-25 14:45 ` Marek Vasut
2014-09-25 14:43 ` Marek Vasut
2014-09-21 13:12 ` [U-Boot] [PATCH 51/51] arm: socfpga: Use CMD_FS_GENERIC Marek Vasut
2014-09-24 13:38 ` Michal Simek
2014-09-22 9:13 ` [U-Boot] [PATCH 28/51] fpga: altera: Clean up altera_validate function Pavel Machek
2014-09-23 15:15 ` [U-Boot] [PATCH 00/51] arm: socfpga: Usability fixes Stefan Roese
2014-09-29 11:12 ` Pavel Machek
2014-09-29 22:54 ` Marek Vasut
2014-10-01 6:18 ` Chin Liang See
2014-10-01 11:13 ` Marek Vasut [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201410011313.15526.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox