[U-Boot] [PATCH fix for v2014.10 4/5] stdio: Add force parameter to stdio_deregister

[Marek Vasut <marex@denx.de>]

On Thursday, October 09, 2014 at 06:14:11 PM, Simon Glass wrote:
> Hi Marek,
> 
> On 9 October 2014 09:12, Marek Vasut <marex@denx.de> wrote:
> > On Thursday, October 09, 2014 at 08:18:14 AM, Simon Glass wrote:
> > > Hi,
> > > 
> > > On 20 September 2014 08:54, Hans de Goede <hdegoede@redhat.com> wrote:
> > > > In some cases we really want to move forward with a deregister, add a
> > > > force parameter to allow this, and replace the dev with a nulldev in
> > > > this case.
> > > > 
> > > > Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> > 
> > [...]
> > 
> > > > diff --git a/drivers/serial/serial-uclass.c
> > > > b/drivers/serial/serial-uclass.c index d04104e..61cbdc6 100644
> > > > --- a/drivers/serial/serial-uclass.c
> > > > +++ b/drivers/serial/serial-uclass.c
> > > > @@ -197,7 +197,7 @@ static int serial_pre_remove(struct udevice *dev)
> > > > 
> > > >  #ifdef CONFIG_SYS_STDIO_DEREGISTER
> > > >  
> > > >         struct serial_dev_priv *upriv = dev->uclass_priv;
> > > > 
> > > > -       if (stdio_deregister_dev(upriv->sdev))
> > > > +       if (stdio_deregister_dev(upriv->sdev), 0)
> > > 
> > > That bracket seems to be in a strange place.
> > 
> > Good find, thanks! I have two questions:
> > 1) How come I did not notice this and my build didn't spit?
> 
> If you have CONFIG_SYS_STDIO_DEREGISTER, CONFIG_DM and
> CONFIG_DM_SERIAL set then I'm not sure. I made sure that sandbox has
> all of these but it might be the only board.

I see, error on my end then. I will start building sandbox for the USB tree.
Thank you for pointing this out! This also stresses my point that U-Boot project
does need a proper CI (which we could have had thanks to Vadim, but we didn't
persudate that, dang again).

I think this CI stuff should be added to the agenda of the U-Boot minisummit 
discussion.

Another point to the CI discussion could be that we could prepare a docker image
with all the toolchains preinstalled, so one can run buildman easily in a well 
defined environment on his/her own.

Best regards,
Marek Vasut