[U-Boot] git bisect failed

[Anatolij Gustschin <agust@denx.de>]

Hi Christian,

On Tue, 21 Oct 2014 13:43:36 +0200
Christian Gmeiner <christian.gmeiner@gmail.com> wrote:

> Hi all.
> 
> Finally I got basic board support for OT1200 into upstream, but the
> last released
> version fails to detect SPI flash (read only ff's).
> 
> The good one is commit 39d0973300b83c08f3f5047245ebf1de883b31f2
> and the bad one is c43fd23cf619856b0763a64a6a3bcf3663058c49

$ git log 39d097330..c43fd23c drivers/spi/mxc_spi.c
commit 155fa9af95ac5be857a7327e7a968a296e60d4c8
Author: Nikita Kiryanov <nikita@compulab.co.il>
Date:   Wed Aug 20 15:08:50 2014 +0300

    spi: mxc: fix sf probe when using mxc_spi
    
    MXC SPI driver has a feature whereas a GPIO line can be used to force CS high
    across multiple transactions. This is set up by embedding the GPIO information
    in the CS value:
    
    cs = (cs | gpio << 8)
    
    This merge of cs and gpio data into one value breaks the sf probe command:
    if the use of gpio is required, invoking "sf probe <cs>" will not work, because
    the CS argument doesn't have the GPIO information in it. Instead, the user must
    use "sf probe <cs | gpio << 8>". For example, if bank 2 gpio 30 is used to force
    cs high on cs 0, bus 0, then instead of typing "sf probe 0" the user now must
    type "sf probe 15872".
    
    This is inconsistent with the description of the sf probe command, and forces
    the user to be aware of implementaiton details.
    
    Fix this by introducing a new board function: board_spi_cs_gpio(), which will
    accept a naked CS value, and provide the driver with the relevant GPIO, if one
    is necessary.
    
    Cc: Eric Nelson <eric.nelson@boundarydevices.com>
    Cc: Eric Benard <eric@eukrea.com>
    Cc: Fabio Estevam <fabio.estevam@freescale.com>
    Cc: Tim Harvey <tharvey@gateworks.com>
    Cc: Stefano Babic <sbabic@denx.de>
    Cc: Tom Rini <trini@ti.com>
    Cc: Marek Vasut <marex@denx.de>
    Reviewed-by: Marek Vasut <marex@denx.de>
    Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
    Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>

Does it work if you revert 155fa9af ?

Thanks,

Anatolij