From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-dm.git
Date: Sun, 26 Oct 2014 20:35:53 -0400 [thread overview]
Message-ID: <20141027003553.GQ25506@bill-the-cat> (raw)
In-Reply-To: <CAPnjgZ1oQF_dZp=-69zRx0xJJX4PYFEQpEtdzpXxKS=bYLnnvA@mail.gmail.com>
On Thu, Oct 23, 2014 at 09:56:11PM -0600, Simon Glass wrote:
> Hi Tom,
>
> This is the second lot of driver model changes, including OMAP which I
> believe is ready. Remaining is SPL, Atmel AT91 and sunxi, all of which
> need either a respin or more review time so I will revisit those next
> week.
>
>
> The following changes since commit 5b3ee386fde82a1ba42ff09b95247842c9a1585e:
>
> kbuild: clear VENDOR variable to fix build error on tcsh (2014-10-23
> 16:35:12 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-dm.git
>
> for you to fetch changes up to c2ded962d4703a3f9522553004db4a6fe540f7e6:
>
> serial: remove uniphier_serial_initialize() call (2014-10-23 21:43:09 -0600)
>
> ----------------------------------------------------------------
> Masahiro Yamada (9):
> dm: move platform data headers to include/dm/platform_data
> serial: add static directive to local functions
> dm: serial: fix console putc
> dm: serial: remove unnecessary casting
> dm: serial: consolidate common code more
> dm: add entries to Kconfig
> dm: serial: use Driver Model for UniPhier serial driver
> serial: uniphier: move CONFIG_UNIPHIER_SERIAL to Kconfig
> serial: remove uniphier_serial_initialize() call
>
> Simon Glass (40):
> dm: gpio: Support numbered GPIOs
> dm: serial: Reset the watchdog while waiting in getc()
> dm: serial: ns16550: Correct logic for checking for character
> dm: ns16550: Use an address instead of a pointer for the uart base
> dm: ns16550: Correct the probe logic for platform data
> dm: serial: Support CONFIG_CONS_INDEX if available
> dm: dts: omap: Select correct console for beaglebone
> dm: omap: gpio: Put _get_gpio_value() logic into its own function
> dm: omap: gpio: Support driver model
> dm: am33xx: Provide platform data for GPIOs
> dm: am33xx: Provide platform data for serial
> dm: omap: serial: Add driver model support
> dm: am335x: Remove serial options from CONFIG_SYS_EXTRA_OPTIONS
> dm: am33xx: Move to driver model for GPIO and serial
> dm: omap3: Move to driver model for GPIO and serial
> dm: gpio: Implement GPIO reservation in the uclass
> dm: gpio: Add gpio_get_function() and friends
> dm: Move the function for getting GPIO status into the uclass
> dm: gpio: sandbox: Implement the get_function() method
> dm: gpio: sandbox: Implement the remove() method
> dm: gpio: sandbox: Drop request()/free() in the driver
> test: dm: Update GPIO tests for new gpio_request() method
> dm: gpio: Add gpio_requestf() helper for printf() strings
> test: dm: Support memory leak checking as a core feature
> test: dm: Add additional GPIO tests
> dm: gpio: tegra: Drop request()/free() in the driver
> dm: gpio: omap3: Drop request()/free() in the driver
> dm: gpio: rpi_b: Drop request()/free() in the driver
> dm: gpio: exynos: Drop request()/free() in the driver
> dm: gpio: imx: Drop request()/free() in the driver
> dm: dts: Move omap device tree includes to correct place
> dm: gpio: Remove unused get_state() uclass method
> dm: serial: ns16550: Add a cast to the I/O operations
> dm: x86: Remove ebp assembler warning in zimage.c
> dm: x86: Zero global data before board_init_f()
> dm: x86: Support pre-reloc malloc()
> dm: x86: Add a gpio header for coreboot
> dm: x86: Convert Intel ICH6 GPIO driver to use driver model
> dm: x86: dts: Add additional info to the serial port node
> dm: x86: Convert coreboot serial to use driver model
>
> arch/arm/cpu/armv7/am33xx/board.c | 61 ++++++++++++
> arch/arm/cpu/armv7/omap3/board.c | 26 ++++-
> arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile | 1 +
> arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c | 15 +++
> arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 1 +
> arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c | 15 +++
> arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile | 1 +
> arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c | 15 +++
> arch/arm/dts/am335x-bone-common.dtsi | 4 +
> arch/arm/dts/dt-bindings/gpio/gpio.h | 15 ---
> arch/arm/include/asm/arch-uniphier/platdevice.h | 24 +++++
> arch/arm/include/asm/omap_gpio.h | 19 +++-
> arch/x86/cpu/start.S | 13 +++
> arch/x86/dts/coreboot.dtsi | 9 +-
> arch/x86/dts/link.dts | 18 +++-
> arch/x86/include/asm/arch-coreboot/gpio.h | 15 +++
> arch/x86/include/asm/gpio.h | 1 +
> arch/x86/include/asm/ibmpc.h | 10 --
> arch/x86/lib/zimage.c | 1 -
> board/compulab/cm_fx6/cm_fx6.c | 2 +-
> board/isee/igep00x0/igep00x0.c | 13 +++
> board/logicpd/zoom1/zoom1.c | 13 +++
> board/overo/overo.c | 13 +++
> board/ti/beagle/beagle.c | 47 +++++----
> board/ti/beagle/led.c | 61 ++++++------
> common/cmd_gpio.c | 57 ++++-------
> configs/am335x_boneblack_defconfig | 2 +-
> configs/am335x_boneblack_vboot_defconfig | 2 +-
> configs/ph1_ld4_defconfig | 3 +
> configs/ph1_pro4_defconfig | 3 +
> configs/ph1_sld8_defconfig | 3 +
> doc/driver-model/README.txt | 29 +++++-
> drivers/core/Kconfig | 6 ++
> drivers/gpio/Kconfig | 6 ++
> drivers/gpio/bcm2835_gpio.c | 89 -----------------
> drivers/gpio/gpio-uclass.c | 236
> ++++++++++++++++++++++++++++++++++++++++-----
> drivers/gpio/intel_ich6_gpio.c | 250
> +++++++++++++++++++++++-------------------------
> drivers/gpio/mxc_gpio.c | 116
> ----------------------
> drivers/gpio/omap_gpio.c | 183
> ++++++++++++++++++++++++++++-------
> drivers/gpio/s5p_gpio.c | 101
> -------------------
> drivers/gpio/sandbox.c | 93 +++---------------
> drivers/gpio/tegra_gpio.c | 113
> ----------------------
> drivers/mmc/omap_hsmmc.c | 15 ++-
> drivers/serial/Kconfig | 12 +++
> drivers/serial/Makefile | 2 +
> drivers/serial/ns16550.c | 17 ++--
> drivers/serial/serial-uclass.c | 99
> ++++++++++---------
> drivers/serial/serial.c | 2 -
> drivers/serial/serial_coreboot.c | 38 ++++++++
> drivers/serial/serial_mxc.c | 2 +-
> drivers/serial/serial_ns16550.c | 21 ++--
> drivers/serial/serial_omap.c | 47 +++++++++
> drivers/serial/serial_pl01x.c | 2 +-
> drivers/serial/serial_s3c24x0.c | 10 +-
> drivers/serial/serial_uniphier.c | 199
> ++++++++++++++------------------------
> drivers/spi/Kconfig | 6 ++
> include/asm-generic/gpio.h | 70 +++++++++++++-
> include/common.h | 7 --
> include/configs/coreboot.h | 22 ++---
> include/configs/ph1_ld4.h | 6 +-
> include/configs/ph1_pro4.h | 6 +-
> include/configs/ph1_sld8.h | 6 +-
> include/configs/ti_am335x_common.h | 11 +++
> include/configs/ti_omap3_common.h | 19 +++-
> include/configs/uniphier-common.h | 7 +-
> include/dm/platform_data/serial-uniphier.h | 18 ++++
> include/{ => dm/platform_data}/serial_mxc.h | 0
> include/{ => dm/platform_data}/serial_pl01x.h | 0
> include/dm/test.h | 23 +++++
> {arch/arm/dts => include}/dt-bindings/pinctrl/am33xx.h | 0
> {arch/arm/dts => include}/dt-bindings/pinctrl/omap.h | 0
> include/ns16550.h | 2 +-
> test/dm/core.c | 46 +++++----
> test/dm/gpio.c | 111
> ++++++++++++++++-----
> test/dm/test-main.c | 2 +
> 75 files changed, 1433 insertions(+), 1100 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c
> create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c
> create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c
> delete mode 100644 arch/arm/dts/dt-bindings/gpio/gpio.h
> create mode 100644 arch/arm/include/asm/arch-uniphier/platdevice.h
> create mode 100644 arch/x86/include/asm/arch-coreboot/gpio.h
> create mode 100644 drivers/serial/serial_coreboot.c
> create mode 100644 drivers/serial/serial_omap.c
> create mode 100644 include/dm/platform_data/serial-uniphier.h
> rename include/{ => dm/platform_data}/serial_mxc.h (100%)
> rename include/{ => dm/platform_data}/serial_pl01x.h (100%)
> rename {arch/arm/dts => include}/dt-bindings/pinctrl/am33xx.h (100%)
> rename {arch/arm/dts => include}/dt-bindings/pinctrl/omap.h (100%)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141026/634c084b/attachment.pgp>
next prev parent reply other threads:[~2014-10-27 0:35 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-24 3:56 [U-Boot] Please pull u-boot-dm.git Simon Glass
2014-10-27 0:35 ` Tom Rini [this message]
-- strict thread matches above, loose matches on Subject: below --
2015-05-15 14:07 Simon Glass
2015-05-16 11:36 ` Tom Rini
2014-10-28 1:30 Simon Glass
2014-10-28 22:54 ` Tom Rini
2014-10-22 17:48 Simon Glass
2014-10-23 0:09 ` Tom Rini
2014-09-23 18:47 Simon Glass
2014-09-23 19:58 ` Tom Rini
2014-09-10 19:04 Simon Glass
2014-09-12 20:09 ` Simon Glass
2014-09-14 15:43 ` Tom Rini
2014-09-02 0:15 Simon Glass
2014-09-02 12:22 ` Tom Rini
2014-08-04 11:28 Simon Glass
2014-08-06 14:37 ` Tom Rini
2014-07-25 15:02 Simon Glass
2014-07-25 18:27 ` Tom Rini
2014-07-26 14:45 ` Simon Glass
2014-06-21 21:04 Simon Glass
2014-06-20 20:25 Simon Glass
2014-06-21 0:05 ` Tom Rini
2014-06-21 21:04 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141027003553.GQ25506@bill-the-cat \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox