From mboxrd@z Thu Jan 1 00:00:00 1970 From: Albert ARIBAUD Date: Mon, 27 Oct 2014 07:32:36 +0100 Subject: [U-Boot] [U-Boot, v4, 14/20] arm: armada-xp: Add basic support for the Marvell DB-MV784MP-GP board In-Reply-To: <20141027003744.GU25506@bill-the-cat> References: <1413972804-24250-15-git-send-email-sr@denx.de> <20141023150546.GB25506@bill-the-cat> <20141027010107.340c2bcb@lilith> <20141027003744.GU25506@bill-the-cat> Message-ID: <20141027073236.3d11413a@lilith> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Tom, On Sun, 26 Oct 2014 20:37:44 -0400, Tom Rini wrote: > On Mon, Oct 27, 2014 at 01:01:07AM +0100, Albert ARIBAUD wrote: > > On Thu, 23 Oct 2014 11:05:46 -0400, Tom Rini a > > ?crit : > > > > > On Wed, Oct 22, 2014 at 12:13:18PM +0200, Stefan Roese wrote: > > > > > > > This patch adds basic support for the Marvell DB-MV784MP-GP > > > > evaulation board. This is the first board that uses the recently > > > > created Armada XP 78460 SoC support. > > > > > > > > Signed-off-by: Stefan Roese > > > > Tested-by: Luka Perkov > > > > > > Applied to u-boot/master, thanks! > > > > I am getting an error here with this board: > > > > Didn't find the file 'board/Marvell/db-mv784mp-gp/binary.0' in > > 'build/current/.bm-work/00/build' which is mandatory to generate the > > image > > This file generally contains the DDR3 training code, and should be > > extracted from an existing bootable > > image for your board. See 'kwbimage -x' to extract it from an > > existing image. > > Could not create image > > > > Am I missing something? > > Yes, we need http://patchwork.ozlabs.org/patch/402556/ and/or the > follow-up that implements proper DDR config. Ok -- I guess I'll live with a broken ARM build for a while. > -- > Tom Amicalement, -- Albert.