[U-Boot] [PATCH] Disable FLASH_AMLV256U support for TOP860 target

[Wolfgang Denk <wd@denx.de>]

Dear Reinhard,

In message <544F7157.9040701@emk-elektronik.de> you wrote:
>
> > - am79c874.c is completely bogus anyway
> How so?

Because it contains just a single code line:

	#include <common.h>

That does not generate any executable code...

> > - flash.c should have been replaced by the CFI driver years ago
> I think there was/is an issue with the fact that top5200 uses GPIO for 
> the uppermost (A16+) address lines AND that FLASH is connected 8 Bit wide.
> Maybe CFI code does support such by now, at that time it did not.
> > - vpd.c is causing efforts when I2C / EEPROM code gets changed
> ideally, the API should not change that often ;)
> >
> > What do you think?
> Since its quite unlikely I will make any changes to those boards in the 
> future, they can be removed.

Excellent.  I'll prepare a patch, then.

Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
How many seconds are there in a year? If I tell you there are 3.155 x
10^7, you won't even try to remember it. On the other hand, who could
forget that, to within half a percent, pi seconds is a nanocentury.
                                                - Tom Duff, Bell Labs