[U-Boot] [PATCH 2/5] usb: s3c-otg: Encapsulate PHY control

[Lukasz Majewski <l.majewski@samsung.com>]

Hi Marek,

> Encapsulate the Samsung PHY control and it's register accesses
> into the otg_phy_init() and otg_phy_off() functions.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Chin Liang See <clsee@altera.com>
> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> Cc: Vince Bridgers <vbridger@altera.com>
> Cc: Pavel Machek <pavel@denx.de>
> Cc: Stefan Roese <sr@denx.de>
> Cc: Lukasz Majewski <l.majewski@samsung.com>
> ---
>  drivers/usb/gadget/s3c_udc_otg.c | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/gadget/s3c_udc_otg.c
> b/drivers/usb/gadget/s3c_udc_otg.c index 7508b1a..b808ddaf 100644
> --- a/drivers/usb/gadget/s3c_udc_otg.c
> +++ b/drivers/usb/gadget/s3c_udc_otg.c
> @@ -145,8 +145,6 @@ static struct usb_ep_ops s3c_ep_ops = {
>  
>  void __iomem		*regs_otg;
>  struct s3c_usbotg_reg *reg;
> -struct s3c_usbotg_phy *phy;
> -static unsigned int usb_phy_ctrl;
>  
>  bool dfu_usb_get_reset(void)
>  {
> @@ -155,6 +153,10 @@ bool dfu_usb_get_reset(void)
>  
>  void otg_phy_init(struct s3c_udc *dev)
>  {
> +	unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
> +	struct s3c_usbotg_phy *phy =
> +		(struct s3c_usbotg_phy *)dev->pdata->regs_phy;
> +
>  	dev->pdata->phy_control(1);
>  
>  	/*USB PHY0 Enable */
> @@ -189,6 +191,10 @@ void otg_phy_init(struct s3c_udc *dev)
>  
>  void otg_phy_off(struct s3c_udc *dev)
>  {
> +	unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl;
> +	struct s3c_usbotg_phy *phy =
> +		(struct s3c_usbotg_phy *)dev->pdata->regs_phy;
> +
>  	/* reset controller just in case */
>  	writel(PHY_SW_RST0, &phy->rstcon);
>  	udelay(20);
> @@ -853,9 +859,7 @@ int s3c_udc_probe(struct s3c_plat_otg_data *pdata)
>  
>  	dev->pdata = pdata;
>  
> -	phy = (struct s3c_usbotg_phy *)pdata->regs_phy;
>  	reg = (struct s3c_usbotg_reg *)pdata->regs_otg;
> -	usb_phy_ctrl = pdata->usb_phy_ctrl;
>  
>  	/* regs_otg = (void *)pdata->regs_otg; */
>  

Acked-by: Lukasz Majewski <l.majewski@samsung.com>

Tested-by: Lukasz Majewski <l.majewski@samsung.com>

HW: Trats2 (Exynos4412) - on top of v2014.10

-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group