From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Fri, 7 Nov 2014 10:29:54 +0100 Subject: [U-Boot] [PATCH] usb_storage: skip all unknown devices when probing In-Reply-To: <545C90B2.3020300@web.de> References: <1415278311-3090-1-git-send-email-smoch@web.de> <201411062141.41448.marex@denx.de> <545C90B2.3020300@web.de> Message-ID: <201411071029.54590.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Friday, November 07, 2014 at 10:28:18 AM, Soeren Moch wrote: > On 11/06/14 21:41, Marek Vasut wrote: > > On Thursday, November 06, 2014 at 01:51:51 PM, Soeren Moch wrote: > >> Not only skip storage devices with DEV_TYPE_UNKNOWN, but also all > >> devices which are unknown to u-boot (e.g., are not HARDDISK, TAPE, > >> CDROM, OPDISK). > >> > >> This especially avoids long timeouts when probing for external usb > >> harddisks which provide "Enclosure Services". > >> > >> Signed-off-by: Soeren Moch > >> -- > >> Cc: Marek Vasut > >> Cc: Tom Rini > >> --- > >> > >> common/usb_storage.c | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >> diff --git a/common/usb_storage.c b/common/usb_storage.c > >> index eb7706c..0ac7b48 100644 > >> --- a/common/usb_storage.c > >> +++ b/common/usb_storage.c > >> @@ -1351,7 +1351,7 @@ int usb_stor_get_info(struct usb_device *dev, > >> struct us_data *ss, perq = usb_stor_buf[0]; > >> > >> modi = usb_stor_buf[1]; > >> > >> - if ((perq & 0x1f) == 0x1f) { > >> + if ((perq & 0x1f) > DEV_TYPE_OPDISK) { > > > > Why can't you just blacklist 0xd instead ? I mean, this patch would do a > > bulk blacklisting of all the obscure devices with peripheral ID above > > 0x7, but might still work with this layer (like 0xc ... the RAID > > controller ; or 0xe ... the reduced block device). > > > > Won't it make sense to just selectively blacklist the 0xd ? > > If you think it makes more sense to blacklist 0xd only, that is fine with > me. I will prepare a new patch for this. Please also make sure to document why this change is in place. (because the Enclosure Services cause trouble). A simple comment in the code would be nice. Thank you! Best regards, Marek Vasut