From: Lukasz Majewski <l.majewski@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 5/5] arm: socfpga: Add example UDC config
Date: Fri, 07 Nov 2014 15:40:00 +0100 [thread overview]
Message-ID: <20141107154000.2f059b83@amdc2363> (raw)
In-Reply-To: <1415077654-17181-5-git-send-email-marex@denx.de>
Hi Marek,
> Add example of an USB UDC configuration with DFU and UMS.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Chin Liang See <clsee@altera.com>
> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> Cc: Vince Bridgers <vbridger@altera.com>
> Cc: Pavel Machek <pavel@denx.de>
> Cc: Stefan Roese <sr@denx.de>
> Cc: Lukasz Majewski <l.majewski@samsung.com>
> ---
> board/altera/socfpga/socfpga_cyclone5.c | 21 +++++++++++++++++++++
> include/configs/socfpga_common.h | 30
> +++++++++++++++++++++++++++++- 2 files changed, 50 insertions(+), 1
> deletion(-)
>
> diff --git a/board/altera/socfpga/socfpga_cyclone5.c
> b/board/altera/socfpga/socfpga_cyclone5.c index 0f81d89..ce625e5
> 100644 --- a/board/altera/socfpga/socfpga_cyclone5.c
> +++ b/board/altera/socfpga/socfpga_cyclone5.c
> @@ -8,6 +8,10 @@
> #include <asm/arch/reset_manager.h>
> #include <asm/io.h>
>
> +#include <usb.h>
> +#include <usb/s3c_udc.h>
> +#include <usb_mass_storage.h>
> +
> #include <netdev.h>
>
> DECLARE_GLOBAL_DATA_PTR;
> @@ -39,3 +43,20 @@ int board_init(void)
>
> return 0;
> }
> +
> +#ifdef CONFIG_USB_GADGET
> +struct s3c_plat_otg_data socfpga_otg_data = {
> + .regs_otg = CONFIG_USB_DWC2_REG_ADDR,
> + .usb_gusbcfg = 0x1417,
> +};
> +
> +int board_usb_init(int index, enum usb_init_type init)
> +{
> + return s3c_udc_probe(&socfpga_otg_data);
> +}
> +
> +int g_dnl_board_usb_cable_connected(void)
> +{
> + return 1;
> +}
> +#endif
> diff --git a/include/configs/socfpga_common.h
> b/include/configs/socfpga_common.h index 1df886b..9823be6 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -37,7 +37,7 @@
> */
> #define CONFIG_NR_DRAM_BANKS 1
> #define PHYS_SDRAM_1 0x0
> -#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
> +#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
> #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
> #define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE
>
> @@ -191,6 +191,34 @@
> #endif
>
> /*
> + * USB Gadget (DFU, UMS)
> + */
> +#if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
> +#define CONFIG_USB_GADGET
> +#define CONFIG_USB_GADGET_S3C_UDC_OTG
> +#define CONFIG_USB_GADGET_DUALSPEED
> +#define CONFIG_USB_GADGET_VBUS_DRAW 2
> +
> +/* USB Composite download gadget - g_dnl */
> +#define CONFIG_USBDOWNLOAD_GADGET
> +#define CONFIG_USB_GADGET_MASS_STORAGE
> +
> +#define CONFIG_DFU_FUNCTION
> +#define CONFIG_DFU_MMC
> +#define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024)
> +#define DFU_DEFAULT_POLL_TIMEOUT 300
> +
> +/* USB IDs */
> +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 /*
> NetChip */ +#define CONFIG_G_DNL_PRODUCT_NUM 0xA4A5 /*
> Linux-USB File-backed Storage Gadget */ +#define
> CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM +#define
> CONFIG_G_DNL_UMS_PRODUCT_NUM CONFIG_G_DNL_PRODUCT_NUM +#ifndef
> CONFIG_G_DNL_MANUFACTURER +#define
> CONFIG_G_DNL_MANUFACTURER "Altera" +#endif
> +#endif
> +
> +/*
> * U-Boot environment
> */
> #define CONFIG_SYS_CONSOLE_IS_IN_ENV
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
next prev parent reply other threads:[~2014-11-07 14:40 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-04 5:07 [U-Boot] [PATCH 1/5] usb: s3c-otg: Remove useless include Marek Vasut
2014-11-04 5:07 ` [U-Boot] [PATCH 2/5] usb: s3c-otg: Encapsulate PHY control Marek Vasut
2014-11-04 19:30 ` Pavel Machek
2014-11-06 9:43 ` Lukasz Majewski
2014-11-04 5:07 ` [U-Boot] [PATCH 3/5] usb: s3c-otg: Split out " Marek Vasut
2014-11-04 19:34 ` Pavel Machek
2014-11-06 20:26 ` Marek Vasut
2014-11-07 8:59 ` Lukasz Majewski
2014-11-07 9:12 ` Marek Vasut
2014-11-07 10:08 ` Lukasz Majewski
2014-11-07 10:28 ` Marek Vasut
2014-11-07 14:23 ` Lukasz Majewski
2014-11-07 15:30 ` Marek Vasut
2014-11-06 9:59 ` Lukasz Majewski
2014-11-06 20:23 ` Marek Vasut
2014-11-06 21:29 ` Lukasz Majewski
2014-11-07 8:05 ` Marek Vasut
2014-11-07 10:40 ` Lukasz Majewski
2014-11-04 5:07 ` [U-Boot] [PATCH 4/5] usb: s3c-otg: Allow custom gusbcfg Marek Vasut
2014-11-04 19:36 ` Pavel Machek
2014-11-06 20:27 ` Marek Vasut
2014-11-07 9:11 ` Lukasz Majewski
2014-11-07 9:25 ` Marek Vasut
2014-11-07 10:22 ` Lukasz Majewski
2014-11-07 14:33 ` Lukasz Majewski
2014-11-07 15:31 ` Marek Vasut
2014-11-04 5:07 ` [U-Boot] [PATCH 5/5] arm: socfpga: Add example UDC config Marek Vasut
2014-11-04 19:51 ` Pavel Machek
2014-11-04 20:09 ` Marek Vasut
2014-11-04 21:01 ` Pavel Machek
2014-11-07 14:40 ` Lukasz Majewski [this message]
2014-11-07 14:53 ` Marek Vasut
2014-11-07 15:28 ` Lukasz Majewski
2014-11-07 15:37 ` Marek Vasut
2014-11-07 15:31 ` Marek Vasut
2014-11-04 19:28 ` [U-Boot] [PATCH 1/5] usb: s3c-otg: Remove useless include Pavel Machek
2014-11-06 9:32 ` Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141107154000.2f059b83@amdc2363 \
--to=l.majewski@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox