From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Fri, 14 Nov 2014 20:58:40 +0100
Subject: [U-Boot] [PATCH v4 0/3] Add board level usb support for
	mxsxsabresd and mx6slevk
In-Reply-To: <1415580641-7759-1-git-send-email-Peng.Fan@freescale.com>
References: <1415580641-7759-1-git-send-email-Peng.Fan@freescale.com>
Message-ID: <201411142058.40556.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Monday, November 10, 2014 at 01:50:38 AM, Peng Fan wrote:
> Changes v4:
>  - Take Marek's suggestions, implement usb_phy_mode function and
>  introduce a weak function board_usb_phy_mode.
>  - change usb_phy_enable's return value with 0.
>  - reimplement board_usb_phy_mode in board code.
>  - add prototype type for board_usb_phy_mode and usb_phy_mode
> 
> Changes v3:
>  - Take Marek's suggestions, replace 'return val & USBPHY_CTRL_OTG_ID' with
>  this new function like 'return board_usb_phy_mode(index);'
>  Detailed discussion here:
>  http://lists.denx.de/pipermail/u-boot/2014-November/194131.html
> 
> Changes v2:
>  - Introduce a new weak function to let board have a choice to decide which
> mode to work at.
>  - move pinmux setting into board_init
>  - add otg polarity setting in board_ehci_hcd_init
>  - set pinmux struct static

Applied all, thanks!

Best regards,
Marek Vasut