From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pavel Machek Date: Sat, 15 Nov 2014 20:54:06 +0100 Subject: [U-Boot] [PATCH v2] arm: socfpga: set skew settings for ethernet phy In-Reply-To: <201411142102.48950.marex@denx.de> References: <1415899421-13816-1-git-send-email-dinguyen@opensource.altera.com> <20141114102327.GB27135@amd> <201411142102.48950.marex@denx.de> Message-ID: <20141115195406.GA9677@amd> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri 2014-11-14 21:02:48, Marek Vasut wrote: > On Friday, November 14, 2014 at 11:23:27 AM, Pavel Machek wrote: > > On Thu 2014-11-13 11:23:41, dinguyen at opensource.altera.com wrote: > > > From: Dinh Nguyen > > > > > > Set the PHY skew settings for the ethernet phy on the SOCFPGA Cyclone5 > > > hardware. > > > > Is it to need similar settings for all ksz9021 phys? Should this go to > > drivers/ as I suggested with a patch? > > > > This is board specific, but with the driver model, this should be moved into the > PHY driver and the values should be passed via platform data or DT. > > I will apply this now, since it fixes real issue. Hmm, could you apply the patch I posted, instead? It has configuration in socfpga_config.h -- "platform data". Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html