From mboxrd@z Thu Jan  1 00:00:00 1970
From: Pavel Machek <pavel@denx.de>
Date: Tue, 25 Nov 2014 12:14:38 +0100
Subject: [U-Boot]  arm: socfpga: script for installing u-boot / u-boot-SPL
In-Reply-To: <201411131402.59132.marex@denx.de>
References: <1415738748-3907-1-git-send-email-dinguyen@opensource.altera.com>
	<20141113133226.5c385ef2@lilith> <20141113124841.GE30779@amd>
	<201411131402.59132.marex@denx.de>
Message-ID: <20141125111438.GA22167@amd>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

It is very easy to overwrite partition on your harddrive when all you
want is installing new u-boot(-SPL). Plus... figuring out needed steps
for installation is not trivial, either. This automates installation,
and provides safety net by checking signature on existing partition.

[I managed to overwrite partition once, and in second incident second
mistake -- -EPERM -- saved my data] 

Signed-off-by: Pavel Machek <pavel@denx.de>


diff --git a/tools/socfpga_install b/tools/socfpga_install
new file mode 100755
index 0000000..b62d3e77
--- /dev/null
+++ b/tools/socfpga_install
@@ -0,0 +1,39 @@
+#!/usr/bin/python3
+
+import subprocess
+import sys
+import os
+
+print("install device ", sys.argv[1])
+device = open(sys.argv[1], "r+b")
+
+sig = device.read(0x44)
+if sig[0x40] != 0x41 or sig[0x41] != 0x53 or \
+   sig[0x42] != 0x30 or sig[0x43] != 0x31:
+    print("Do not see AS01 signature, do you have right partition?")
+    sys.exit(1)
+
+print("u-boot-spl.bin at ", sys.argv[2])
+spl = sys.argv[2]
+
+res = subprocess.check_call(["tools/mkimage", "-T", "socfpgaimage", "-d", spl, "img.tmp"])
+if res != 0:
+   print("mkimage failed.")
+   sys.exit(1)
+device.seek(0)
+
+spl_bin = open("img.tmp", "rb").read()
+if len(spl_bin) != 65536:
+   print("Preloader image has wrong length.")
+   sys.exit(1)
+ 
+device.write(spl_bin)
+device.write(spl_bin)
+device.write(spl_bin)
+device.write(spl_bin)
+
+print("u-boot.img at ", sys.argv[3])
+uboot_bin = open(sys.argv[3], "rb").read()
+print("Have u-boot, %d bytes" % len(uboot_bin))
+device.write(uboot_bin)
+print("All done.")
\ No newline at end of file


-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html