[U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board

[Hyungwon Hwang <human.hwang@samsung.com>]

Dear Kevin,

On Tue, 09 Dec 2014 15:36:00 -0800
Kevin Hilman <khilman@kernel.org> wrote:

> Hyungwon Hwang <human.hwang@samsung.com> writes:
> 
> > This is v11 of the patchset adding support Odroud XU3 board.
> 
> I finally got around to testing this on top of v2015.01-rc3 on my XU3.
> 
> As I mentioned earlier, I had to enable the USB and networking options
> so I could dhcp/tftp but after that it works for me.
> 
> Feel free to add:
> 
> Tested-by: Kevin Hilman <khilman@linaro.org>

Thanks for yout review. Sjoerd is waiting for his patch merged
(title: Exynos: Move down common USB
configuration). So the features related USB and networking will be
enabled after this patchset and his patch are merged.

> 
> [...]
> 
> > Note: If you use micro SD card for your test you have to apply the
> > below patch additionally. This patch is needed, because micro sd
> > card is recognized as MMC1 instead of MMC0. Additional work is
> > needed to make it work regardless of device id.
> 
> FYI, with or without your MMC ID patch, I wasn't able to save the
> environment to the SD card I'm booting from:
> 
> ODROID-XU3 # saveenv
> Saving Environment to MMC...
> dwmci_send_cmd: Timeout.
> MMC init failed
> 

Actually I just tested it again. But it works for me.

Saving Environment to MMC...
Writing to MMC(1)... done

I applied my patchset and MMC ID patch to commit
38cd8c4253013ccdd4052ee021f6066fe9a52551 in
http://git.denx.de/u-boot-samsung.git (branch: master).

I don't know why it does't work for you. Please feel free to need my
help for this, if you need.

> Kevin

Best regards,
Hyungwon Hwang