From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hyungwon Hwang Date: Wed, 10 Dec 2014 09:58:34 +0900 Subject: [U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board In-Reply-To: <7h1to8qtun.fsf@deeprootsystems.com> References: <1418092779-20025-1-git-send-email-human.hwang@samsung.com> <7h1to8qtun.fsf@deeprootsystems.com> Message-ID: <20141210095834.2f4f9bb2@hwh-ubuntu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Kevin, On Tue, 09 Dec 2014 15:36:00 -0800 Kevin Hilman wrote: > Hyungwon Hwang writes: > > > This is v11 of the patchset adding support Odroud XU3 board. > > I finally got around to testing this on top of v2015.01-rc3 on my XU3. > > As I mentioned earlier, I had to enable the USB and networking options > so I could dhcp/tftp but after that it works for me. > > Feel free to add: > > Tested-by: Kevin Hilman Thanks for yout review. Sjoerd is waiting for his patch merged (title: Exynos: Move down common USB configuration). So the features related USB and networking will be enabled after this patchset and his patch are merged. > > [...] > > > Note: If you use micro SD card for your test you have to apply the > > below patch additionally. This patch is needed, because micro sd > > card is recognized as MMC1 instead of MMC0. Additional work is > > needed to make it work regardless of device id. > > FYI, with or without your MMC ID patch, I wasn't able to save the > environment to the SD card I'm booting from: > > ODROID-XU3 # saveenv > Saving Environment to MMC... > dwmci_send_cmd: Timeout. > MMC init failed > Actually I just tested it again. But it works for me. Saving Environment to MMC... Writing to MMC(1)... done I applied my patchset and MMC ID patch to commit 38cd8c4253013ccdd4052ee021f6066fe9a52551 in http://git.denx.de/u-boot-samsung.git (branch: master). I don't know why it does't work for you. Please feel free to need my help for this, if you need. > Kevin Best regards, Hyungwon Hwang