From mboxrd@z Thu Jan  1 00:00:00 1970
From: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Date: Tue, 30 Dec 2014 13:25:55 +0200
Subject: [U-Boot] [PATCH 15/17] sunxi: Ippo_q8h defconfigs: Enable the
 LCD panel found on these tablets.
In-Reply-To: <54A28027.3070201@redhat.com>
References: <1419447989-21959-1-git-send-email-hdegoede@redhat.com>
	<1419447989-21959-16-git-send-email-hdegoede@redhat.com>
	<CAGb2v64prnWthEU+aw3dk_pN4S=3h=DJM9yh2UxruX9=B2mEQg@mail.gmail.com>
	<549BEE2B.5070803@redhat.com> <20141230121802.36365251@i7>
	<54A27DEB.1000005@redhat.com> <54A28027.3070201@redhat.com>
Message-ID: <20141230132555.4ee09385@i7>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Tue, 30 Dec 2014 11:36:23 +0100
Hans de Goede <hdegoede@redhat.com> wrote:

> Hi,
> 
> On 30-12-14 11:26, Hans de Goede wrote:
> > Hi,
> >
> > On 30-12-14 11:18, Siarhei Siamashka wrote:
> 
> <snip>
> 
> >> BTW, I have done a preliminary automatic conversion for all FEX
> >> files from sunxi-boards, which enable lcd0 in fex. The results are
> >> now available at the all the same http://linux-sunxi.org/LCD wiki page.
> >
> > Cool, thanks for doing this!
> 
> I've just taken a look, looks good, as for the yellow entries with:
> 
> # warning: could not decode 'lcd_power' (port:power0<1><0><default><1>)
> 
> Those should be translated to:
> 
> CONFIG_VIDEO_LCD_FOO="AXP0-0" for power0
> CONFIG_VIDEO_LCD_FOO="AXP0-1" for power1

Is this supported only for AXP209 so far? What about the devices with
a different PMIC?

> And I think you can also drop the:
> 
> "# warning: 'lcd_pwm' gpio extracted from 'pwm0_para' section"
> 
> That seems to be the right thing todo for A23 at least.

OK. Right now it looks up the "pwmX_para" section, where X is the
number from "lcd_pwm_ch" found in the "lcd0_para" section.

Thanks for your comments and clarifications.

-- 
Best regards,
Siarhei Siamashka