From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Mon, 12 Jan 2015 03:59:12 +0100
Subject: [U-Boot] [PATCH 00/17] sunxi: musb otg controller support
In-Reply-To: <1421004895-10896-1-git-send-email-hdegoede@redhat.com>
References: <1421004895-10896-1-git-send-email-hdegoede@redhat.com>
Message-ID: <201501120359.12467.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Sunday, January 11, 2015 at 08:34:38 PM, Hans de Goede wrote:
> Hi Marek, Ian, et al,
> 
> I'm very happy to present this patch series, which is the last pieze of
> the puzzle to make it possible for people to use u-boot on sunxi devices
> without needing to resort to putting a soldering iron to their tablet :)
> 
> With this series sunxi tablet owners can simply plug in a usb keyboard into
> the otg port of their tablet (how boring).
> 
> Interestingly enough getting the musb code to work on sunxi was quite east,
> most of my time went into fixing generic usb / musb issues, which should
> help on other boards too :)
> 
> This entire series is based on u-boot-sunxi/next and for some of the sunxi
> specific patches there will likely be conflicts when applied directly to
> master, therefor I would like to suggest the following scheme for getting
> this upstream:
> 
> 1) Add patches 1-5 to u-boot-sunxi/next (once reviewed)
> 2) Add patches 6-16 to u-boot-usb/next (once reviewed)

Applied 6-16 to u-boot-usb/next (V2 of 07 is applied instead).

Thanks!

Best regards,
Marek Vasut