From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Wed, 14 Jan 2015 10:30:34 -0500 Subject: [U-Boot] Please pull u-boot-sunxi master In-Reply-To: <54B67A4C.3070305@redhat.com> References: <54B67A4C.3070305@redhat.com> Message-ID: <20150114153034.GV10826@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Jan 14, 2015 at 03:16:44PM +0100, Hans de Goede wrote: > Hi Tom, > > We've been building a collection of very nice improvements for sunxi > while v2015.01 was stabilizing, please pull u-boot-sunxi/master into master, > highlights: > > 1) Improved sun6i (A31) support, including support for the A31s variant and > automatic assignment of a SoC serial based MAC address for ethernet > 2) Full sun8i (A23) support including DRAM controller init and SPL, so now > people can boot these boards using a full FOSS solution > 3) Many improvement to the graphical console support, automatic selection > of the native mode for HDMI/DVI monitors via DDC + EDID, LCD panel support, > VGA output support > 4) Preparation work for OTG controller support, together with 3) this allows using > u-boot on tablets effortlessly. The rest of the OTG support is going upstream > through the usb tree > > The following changes since commit 5f88ed5cde04612e5b4520327b82d81a3f5493a0: > > Merge git://git.denx.de/u-boot-x86 (2015-01-13 13:39:25 -0500) > > are available in the git repository at: > > http://git.denx.de/u-boot-sunxi.git master > > for you to fetch changes up to a90e77dbeb92f78ec06547621a7b22a785a43a3d: > > sunxi: usbc: Add support for usb-vbus0 controller by axp drivebus pin (2015-01-14 14:56:40 +0100) > Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: