From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pali =?utf-8?q?Roh=C3=A1r?= Date: Thu, 15 Jan 2015 10:07:05 +0100 Subject: [U-Boot] U-Boot warnings on Nokia N900 Message-ID: <201501151007.05140@pali> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, when starting U-Boot (from git master) on Nokia N900 it show lot of these lines on N900 screen: Timed out in wait_for_event: status=0000 Check if pads/pull-ups of bus 1 are properly configured Timed out in wait_for_event: status=0000 Check if pads/pull-ups of bus 1 are properly configured ... i2c_read (addr phase): pads on bus 1 probably not configured (status=0x10) i2c_write: timeout writing last byte! But booting linux kernel working without problem. What above warning messages means? They were not in U-Boot 2013.04 version. -- Pali Roh?r pali.rohar at gmail.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: This is a digitally signed message part. URL: