From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCHv1 02/22] arm: socfpga: enable saveenv to mmc partition
Date: Fri, 16 Jan 2015 06:14:08 +0100 [thread overview]
Message-ID: <201501160614.08481.marex@denx.de> (raw)
In-Reply-To: <54B8988A.1060102@denx.de>
On Friday, January 16, 2015 at 05:50:18 AM, Stefan Roese wrote:
Hi!
> >> Would it make sense to make environment bigger (64K?) at this point,
> >> and enabling the redundant environment option, so that one bad block
> >> does not bring the whole device down?
> >
> > Do you think you'll ever have more than a 4KiB of text data in the env ?
>
> I have used bigger environment in some cases.
>
> > I can see a reason for some 16 KiB environment, but that's the ceiling.
>
> Then lets switch to at least 8KiB please.
>
> Pavel, would be 8KiB enough for your project?
>
> > Usually, the env only has to be a few KiB and it's size has to be
> > multiple of the underlying device's erase block. But in case of SD card,
> > there are no explicit erase blocks exported to the user, all is hidden
> > by the controller in the SD card and gives an illusion of a device which
> > has 512b blocks and the user doesn't care for bad block management.
> > Since the controller in the card does the bad block management and wear
> > leveling/relocation of blocks, it also means that in case the controller
> > did fail to provide the block which contains env, the whole card would
> > already be in a very bad state.
>
> Right. Nevertheless it makes sense to support the redundant envrionment
> (at least from my point of view), regardless of the device the
> evironment is stored in. Thinking for example about power-supply failure
> (power-cut) while writing into the one envrionment version.
That's a fine idea, you're right :)
Best regards,
Marek Vasut
next prev parent reply other threads:[~2015-01-16 5:14 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-14 16:40 [U-Boot] [PATCHv1 00/22] Add SPL support for SoCFGPA dinguyen at opensource.altera.com
2015-01-14 16:40 ` [U-Boot] [PATCHv1 01/22] arm: socfpga: spl: Add main sdram code dinguyen at opensource.altera.com
2015-01-14 23:34 ` Marek Vasut
2015-01-16 19:04 ` Pavel Machek
2015-01-17 2:39 ` Marek Vasut
2015-02-04 13:36 ` Pavel Machek
2015-01-20 23:51 ` Dinh Nguyen
2015-01-21 8:03 ` Stefan Roese
2015-02-15 23:11 ` Pavel Machek
2015-02-15 23:25 ` Pavel Machek
2015-02-23 16:37 ` Dinh Nguyen
2015-02-23 16:39 ` Dinh Nguyen
2015-02-23 16:57 ` Marek Vasut
2015-02-23 17:00 ` Dinh Nguyen
2015-02-24 17:48 ` Marek Vasut
2015-01-14 16:40 ` [U-Boot] [PATCHv1 02/22] arm: socfpga: enable saveenv to mmc partition dinguyen at opensource.altera.com
2015-01-14 23:39 ` Marek Vasut
2015-01-15 22:00 ` Pavel Machek
2015-01-15 22:08 ` Marek Vasut
2015-01-16 4:50 ` Stefan Roese
2015-01-16 5:14 ` Marek Vasut [this message]
2015-01-16 18:35 ` Pavel Machek
2015-01-17 13:51 ` Marek Vasut
2015-01-14 16:40 ` [U-Boot] [PATCHv1 03/22] arm: socfpga: Add sdram initialization code dinguyen at opensource.altera.com
2015-01-14 23:41 ` Marek Vasut
2015-01-14 16:40 ` [U-Boot] [PATCHv1 04/22] arm: socfpga: spl: Add SRAM section dinguyen at opensource.altera.com
2015-01-14 23:40 ` Marek Vasut
2015-01-15 22:01 ` Pavel Machek
2015-01-14 16:40 ` [U-Boot] [PATCHv1 05/22] arm: socfpga: spl: put SPL in sram dinguyen at opensource.altera.com
2015-01-16 19:05 ` Pavel Machek
2015-01-14 16:40 ` [U-Boot] [PATCHv1 06/22] arm: socfpga: add functions to bring sdram, timer, and uart out of reset dinguyen at opensource.altera.com
2015-01-14 23:42 ` Marek Vasut
2015-01-16 19:06 ` Pavel Machek
2015-01-14 16:40 ` [U-Boot] [PATCHv1 07/22] arm: socfpga: spl: enable sdram, timer and uart dinguyen at opensource.altera.com
2015-01-14 23:44 ` Marek Vasut
2015-02-16 21:35 ` Pavel Machek
2015-01-14 16:40 ` [U-Boot] [PATCHv1 08/22] arm: socfpga: spl: Add call to timer_init dinguyen at opensource.altera.com
2015-01-14 23:45 ` Marek Vasut
2015-02-04 3:58 ` Dinh Nguyen
2015-01-14 16:40 ` [U-Boot] [PATCHv1 09/22] arm: socfpga: spl: allow bootrom to enable IOs after warm reset dinguyen at opensource.altera.com
2015-01-14 23:46 ` Marek Vasut
2015-02-16 21:36 ` Pavel Machek
2015-02-17 7:09 ` Marek Vasut
2015-01-14 16:40 ` [U-Boot] [PATCHv1 10/22] arm: socfpga: spl: add sdram init and calibration dinguyen at opensource.altera.com
2015-01-14 23:47 ` Marek Vasut
2015-02-16 21:37 ` Pavel Machek
2015-01-14 16:40 ` [U-Boot] [PATCHv1 11/22] arm: socfpga: spl: printout sdram size dinguyen at opensource.altera.com
2015-01-14 23:49 ` Marek Vasut
2015-01-14 16:40 ` [U-Boot] [PATCHv1 12/22] arm: socfpga: spl: Use common lowlevel_init dinguyen at opensource.altera.com
2015-01-14 23:51 ` Marek Vasut
2015-01-14 16:40 ` [U-Boot] [PATCHv1 13/22] arm: socfpga: spl: Add s_init dinguyen at opensource.altera.com
2015-01-14 23:54 ` Marek Vasut
2015-02-05 21:16 ` Dinh Nguyen
2015-02-07 13:34 ` Marek Vasut
2015-02-09 16:50 ` Dinh Nguyen
2015-02-09 17:05 ` Marek Vasut
2015-02-07 17:07 ` Simon Glass
2015-01-14 16:40 ` [U-Boot] [PATCHv1 14/22] arm: socfpga: spl: update lowlevel_init dinguyen at opensource.altera.com
2015-01-14 23:56 ` Marek Vasut
2015-01-14 16:40 ` [U-Boot] [PATCHv1 15/22] arm: socfpga: spl: add relocate_stack_to_sdram to lowlevel_init.S dinguyen at opensource.altera.com
2015-01-14 23:58 ` Marek Vasut
2015-01-15 19:19 ` Dinh Nguyen
2015-01-15 22:00 ` Marek Vasut
2015-01-16 0:07 ` Dinh Nguyen
2015-01-16 0:48 ` Marek Vasut
2015-01-14 16:40 ` [U-Boot] [PATCHv1 16/22] arm: socfpga: spl: add the stack in OCRAM dinguyen at opensource.altera.com
2015-01-14 23:59 ` Marek Vasut
2015-01-14 16:40 ` [U-Boot] [PATCHv1 17/22] arm: socfpga: spl: add CONFIG_SPL_STACK to socfpga_common.h dinguyen at opensource.altera.com
2015-01-15 0:00 ` Marek Vasut
2015-01-16 21:56 ` Pavel Machek
2015-01-14 16:40 ` [U-Boot] [PATCHv1 18/22] arm: socfpga: add sdram stack to SPL dinguyen at opensource.altera.com
2015-01-14 16:40 ` [U-Boot] [PATCHv1 19/22] arm: socfpga: spl: set SPL_MALLOC_SIZE dinguyen at opensource.altera.com
2015-01-15 0:01 ` Marek Vasut
2015-01-14 16:41 ` [U-Boot] [PATCHv1 20/22] arm: socfpga: spl: add a malloc section in sram dinguyen at opensource.altera.com
2015-01-15 0:03 ` Marek Vasut
2015-01-14 16:41 ` [U-Boot] [PATCHv1 21/22] arm: socfpga: spl: Add SDRAM check dinguyen at opensource.altera.com
2015-01-15 0:04 ` Marek Vasut
2015-01-16 21:59 ` Pavel Machek
2015-01-17 11:00 ` Marek Vasut
2015-01-14 16:41 ` [U-Boot] [PATCHv1 22/22] arm: socfpga: spl: update pll_config for dev kit dinguyen at opensource.altera.com
2015-01-15 0:05 ` Marek Vasut
2015-01-14 23:01 ` [U-Boot] [PATCHv1 00/22] Add SPL support for SoCFGPA Marek Vasut
2015-01-15 21:57 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201501160614.08481.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox