From mboxrd@z Thu Jan 1 00:00:00 1970 From: Siarhei Siamashka Date: Thu, 22 Jan 2015 09:47:32 +0200 Subject: [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: Add Gemei G9 (Allwinner A10/sun4i) tablet In-Reply-To: <54BE6993.1060706@redhat.com> References: <1421698570-1327-1-git-send-email-plaes@plaes.org> <54BE6993.1060706@redhat.com> Message-ID: <20150122094732.3064bc5e@i7> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, 20 Jan 2015 15:43:31 +0100 Hans de Goede wrote: > Hi, > > On 19-01-15 21:16, Priit Laes wrote: > > Gemei G9 is an A10 based tablet, with 1G RAM, 16G NAND, 1024x768 > > IPS LCD display, stereo speakers, 1.3MP front camera and 5 MP > > rear camera, 8000mAh battery, GT901 2+1 touchscreen, Bosch BMA250 > > accelerometer and RTL8188CUS USB wifi. It also has MicroSD slot, > > miniHDMI, 1 x MicroUSB OTG port and 1 x MicroUSB host port and > > 3.5mm headphone jack. > > More details are available at: http://linux-sunxi.org/Gemei_G9 > > > > Signed-off-by: Priit Laes > > Thanks, queued up in u-boot-sunxi/next for merging into v2015.04 > > Regards, > > Hans > > > --- > > board/sunxi/MAINTAINERS | 5 +++++ > > configs/sunxi_Gemei_G9_defconfig | 20 ++++++++++++++++++++ > > 2 files changed, 25 insertions(+) > > create mode 100644 configs/sunxi_Gemei_G9_defconfig [...] > > +CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:18,pclk_khz:100000,le:799,ri:260,up:15,lo:16,hs:1,vs:1,sync:3,vmode:0" > > +CONFIG_VIDEO_LCD_PANEL_LVDS=y > > +CONFIG_VIDEO_LCD_POWER="PH8" > > +CONFIG_VIDEO_LCD_BL_EN="PH7" > > +CONFIG_VIDEO_LCD_BL_PWM="PB2" We have already talked with plaes on IRC yesterday, just now bringing it here. I have finally updated the http://linux-sunxi.org/LCD page to add LVDS panels data and now for Gemei_G9 we have the following settings there: CONFIG_VIDEO_LCD_MODE="x:1024,y:768,depth:24,pclk_khz:100000,le:799,ri:260,up:15,lo:16,hs:1,vs:1,sync:3,vmode:0" CONFIG_VIDEO_LCD_PANEL_LVDS=y # warning: unsupported 'lcd_lvds_mode' : 1 CONFIG_VIDEO_LCD_POWER="PH8" CONFIG_VIDEO_LCD_BL_EN="PH7" CONFIG_VIDEO_LCD_BL_PWM="PB2" It's good that lcd_lvds_mode=1 apparently works without problems, while this was not fully expected according to http://lists.denx.de/pipermail/u-boot/2015-January/200168.html Also confirming whether 18-bit or 24-bit is the correct color depth would be a good idea. This tablet has 'lcd_frm = 1' and 'lcd_lvds_bitwidth = 0' in fex. -- Best regards, Siarhei Siamashka