From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/5] Enable booting of mx28 without battery
Date: Thu, 22 Jan 2015 14:51:38 +0100 [thread overview]
Message-ID: <201501221451.39057.marex@denx.de> (raw)
In-Reply-To: <CAOMZO5ALWECLtnZxmbgRz7q36Z8waXSHuXfOTJF2YvCYUwMJ9g@mail.gmail.com>
On Thursday, January 22, 2015 at 01:42:10 PM, Fabio Estevam wrote:
> Hi Graeme,
>
> On Wed, Jan 21, 2015 at 9:55 AM, Graeme Russ <gruss@tss-engineering.com>
wrote:
> > Section 4.1.2 of Freescale Application Note AN4199 describes the
> > configuration required to operate the mx28 from a 5V source without a
> > battery. This patch implements the changes to the Freescale bootlets
> > which allow this configuration to properly boot the mx28 processor
> >
> > Signed-off-by: Graeme Russ <gruss@tss-engineering.com>
> > ---
> >
> > arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 190
> > +++++++++++++++++++++++++++- doc/README.mxs
> > | 10 ++
>
> Damien posted today a new version of this patch in the imx community,
> which is a lot simpler.
Guys, we have U-Boot mailing list for posting U-Boot patches. It'd be nice
if you could use it to prevent fragmentation of efforts ;-)
But of course, the effort is appreciated, just a rant.
Best regards,
Marek Vasut
next prev parent reply other threads:[~2015-01-22 13:51 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-21 11:55 [U-Boot] [PATCH 0/5] Add support for G2C1 mx28 board (which has no battery) Graeme Russ
2015-01-21 11:55 ` [U-Boot] [PATCH 1/5] Add debug output to mx29 SPL source files Graeme Russ
2015-01-21 20:49 ` Fabio Estevam
2015-01-21 23:24 ` Marek Vasut
2015-01-22 4:24 ` Graeme Russ
2015-01-21 11:55 ` [U-Boot] [PATCH 2/5] Enable booting of mx28 without battery Graeme Russ
2015-01-21 12:03 ` Graeme Russ
2015-01-21 21:08 ` Fabio Estevam
2015-01-21 23:27 ` Marek Vasut
2015-01-23 0:58 ` Graeme Russ
2015-01-22 12:42 ` Fabio Estevam
2015-01-22 13:51 ` Marek Vasut [this message]
2015-01-23 2:58 ` Graeme Russ
2015-01-23 3:01 ` Fabio Estevam
2015-01-23 3:27 ` Graeme Russ
2015-01-23 3:49 ` Fabio Estevam
2015-01-23 4:14 ` Graeme Russ
[not found] ` <DB3PR05MB252F1D6A1521E87599A5991CB360@DB3PR05MB252.eurprd05.prod.outlook.com>
2015-01-23 8:11 ` Graeme Russ
2015-01-23 13:01 ` Stefano Babic
2015-01-21 11:55 ` [U-Boot] [PATCH 3/5] Add 'Wait for JTAG user' if booted in JTAG mode Graeme Russ
2015-01-21 15:35 ` Stefan Roese
2015-01-21 11:55 ` [U-Boot] [PATCH 4/5] Move PLL power-up from power init to memory init Graeme Russ
2015-01-21 23:33 ` Marek Vasut
2015-01-21 11:55 ` [U-Boot] [PATCH 5/5] Add support for ReachTech G2C1 board Graeme Russ
2015-01-21 20:53 ` Fabio Estevam
2015-01-21 23:03 ` Marek Vasut
2015-01-22 4:21 ` Graeme Russ
2015-01-21 23:36 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201501221451.39057.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox